TPE-3524S - Switch TRENDNET - Free user manual and instructions
Find the device manual for free TPE-3524S TRENDNET in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Model | TPE-3524S |
| Ports | 24 x 10/100/1000 PoE+ ports, 2 x Gigabit SFP slots |
| PoE Budget | 192W |
| Switching Capacity | 56 Gbps |
| MAC Address Table | 8K entries |
| Dimensions (W x D x H) | 17.32 x 8.27 x 1.73 in (440 x 210 x 44 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | Internal, AC 100-240V, 50/60Hz |
| Power Consumption | Max 250W (with PoE) |
| Management | Web interface, SNMP, CLI, Telnet, SSH |
| VLAN Support | 802.1Q VLAN, up to 256 groups |
| Quality of Service | 802.1p, port-based, DSCP |
| Security | 802.1X, ACL, port security |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Cooling | Fanless (or one fan, typical) |
| Mounting | 19-inch rack-mountable, desktop |
| Maintenance | Clean with dry cloth, avoid liquids |
| Safety Precautions | Keep away from moisture, ensure ventilation |
| Spare Parts / Repairability | No user-serviceable parts; contact support |
| Manual | 188 pages, free download on notice-facile.com |
Frequently Asked Questions - TPE-3524S TRENDNET
How do I reset the TRENDnet TPE-3524S to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the device is powered on. This will restore factory settings, including IP address.
What is the default IP address of the TPE-3524S?
The default IP address is 192.168.10.100 with subnet mask 255.255.255.0. You can access the web interface using this IP.
How many PoE ports does the TPE-3524S have?
It has 24 PoE+ ports, each capable of delivering up to 30W, with a total PoE budget of 192W.
Can I use SFP modules for uplink?
Yes, the TPE-3524S is equipped with 2 Gigabit SFP slots for fiber or copper uplinks, using compatible SFP modules.
How do I configure VLANs on this switch?
Access the web interface, go to Advanced > VLAN > 802.1Q VLAN, and create VLAN groups. Assign ports to VLANs as needed. You can also set PVID and tagging.
What is the power consumption of the switch without PoE?
The switch itself consumes approximately 25W without PoE. The maximum power consumption with full PoE load is up to 250W.
How do I update the firmware?
Download the latest firmware from TRENDnet's support site, then go to System > Firmware Upgrade in the web interface, upload the file, and wait for reboot. Do not power off during upgrade.
Does the TPE-3524S support SNMP?
Yes, it supports SNMP v1, v2c, and v3 for network monitoring and management. You can configure SNMP via the web interface or CLI.
What should I do if the switch is not powering on?
Check the power cord and outlet. Ensure the power switch on the back is on. If still not working, try a different power cord or contact TRENDnet support.
Is the switch fanless?
The TPE-3524S has one internal fan for cooling, but it is quiet. Ensure proper ventilation around the device.
User questions about TPE-3524S TRENDNET
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual TPE-3524S - TRENDNET and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TPE-3524S by TRENDNET.
USER MANUAL TPE-3524S TRENDNET
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TRENDNET
Model : TPE-3524S
Category : Switch