TL2-F7120 - Switch TRENDNET - Free user manual and instructions
Find the device manual for free TL2-F7120 TRENDNET in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gigabit Managed Switch |
| Ports | 12 x 10/100/1000 Mbps Gigabit Ethernet + 2 x SFP Slots |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 8K entries |
| Jumbo Frame Support | 9K bytes |
| Power Supply | AC 100-240V, 50-60Hz, internal power supply |
| Power Consumption | 12.5 Watts (max) |
| Dimensions (W x D x H) | 280 x 180 x 44 mm (11.0 x 7.1 x 1.7 inches) |
| Weight | 1.2 kg (2.65 lbs) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| LED Indicators | Power, Link/Activity, Speed per port |
| Management Features | Web-based GUI, SNMP, VLAN, QoS, IGMP Snooping, Link Aggregation |
| Safety Certifications | CE, FCC Class A, UL |
| Package Contents | Switch, Power Cord, Rack Mount Kit, Quick Installation Guide |
| Spare Parts Availability | Contact TRENDnet support for replacement power supplies or fans |
| Cleaning Instructions | Use a dry, soft cloth to clean the device. Do not use liquid or aerosol cleaners. |
Frequently Asked Questions - TL2-F7120 TRENDNET
How do I access the web management interface of the TL2-F7120?
Connect your computer to any port on the switch. Set your computer's IP address to 192.168.10.x (subnet mask 255.255.255.0). Open a web browser and enter the default IP address 192.168.10.200. The default username is admin and password is admin.
Can I mount the TL2-F7120 in a rack?
Yes, the switch comes with a rack mount kit. Attach the brackets to the sides of the switch and secure it to a standard 19-inch rack using screws.
What is the default VLAN configuration?
By default, all ports belong to VLAN 1. You can create additional VLANs via the web interface under VLAN > 802.1Q VLAN.
Does the switch support PoE?
No, the TL2-F7120 does not support Power over Ethernet (PoE). It is a standard Gigabit managed switch.
How do I reset the switch to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds until all LEDs blink. Release the button; the switch will reboot with factory settings.
What is the maximum cable length for Ethernet ports?
The switch supports standard Ethernet cabling up to 100 meters (328 feet) for Cat5e or better cables.
Can I use SFP modules for fiber optic connections?
Yes, the two SFP slots accept standard 1000Base-SX/LX SFP modules for fiber uplinks. Refer to the user manual for compatible models.
Does the switch support link aggregation?
Yes, it supports IEEE 802.3ad Link Aggregation. You can configure up to 8 port trunks via the web interface under LAG settings.
How to update the firmware?
Download the latest firmware from TRENDnet's support website. Go to Maintenance > Firmware Upgrade in the web interface, select the file, and click Upgrade. Do not power off during the process.
What are the power requirements?
The switch operates on AC 100-240V, 50-60Hz. It consumes a maximum of 12.5 Watts. Use the supplied power cord.
User questions about TL2-F7120 TRENDNET
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual TL2-F7120 - TRENDNET and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TL2-F7120 by TRENDNET.
USER MANUAL TL2-F7120 TRENDNET
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TRENDNET
Model : TL2-F7120
Category : Switch