Sierra 48 - Fireplace DIMPLEX - Free user manual and instructions
Find the device manual for free Sierra 48 DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric fireplace |
| Brand | Dimplex |
| Model | Sierra 48 |
| Dimensions (W x H x D) | 122 cm x 60 cm x 30 cm |
| Weight | 45 kg |
| Power supply | 220-240 V, 50 Hz |
| Heating power | 1500-2000 W (adjustable) |
| Maximum heating area | Up to 40 m² |
| Flame type | 3D LED technology |
| Main functions | Fan heating, flame only, remote control, timer 1-8 h |
| Maintenance and cleaning | Clean the air filter once a month; dust the grille |
| Safety | Automatic shut-off in case of overheating, cold glass surface |
| Spare parts and repairability | Available on request from customer service |
| Installation | Recessed or wall-mounted (kit included) |
| Warranty | 2 years |
Frequently Asked Questions - Sierra 48 DIMPLEX
How to install the Dimplex Sierra 48 fireplace?
The fireplace can be installed recessed or wall-mounted. Use the provided mounting kit and follow the safety distances indicated in the manual. Make sure the electrical outlet is accessible.
Can the flame be used without heating?
Yes, you can activate only the flame effect without heating by pressing the Flame button on the remote control or control panel.
How to clean the air filter?
Turn off and unplug the appliance. Remove the access panel, take out the filter and clean it with a soft vacuum or rinse with warm water. Let dry completely before putting it back.
The remote control does not work, what to do?
Check the batteries of the remote control and replace if necessary. Make sure there is no obstacle between the remote and the receiver. If the problem persists, contact customer service.
What is the power consumption of the appliance?
In maximum heating mode, consumption is approximately 2000 W (2 kWh). In flame-only mode, it is approximately 20 W.
Does the glass surface become hot?
No, the glass remains cool to the touch thanks to CoolTouch technology. However, the hot air outlet grille may be hot.
Can I program the automatic shut-off?
Yes, use the built-in timer to set the shut-off after 1 to 8 hours. Press the Timer button on the remote control.
The new smell persists, is this normal?
Yes, it is normal to feel a slight odor during the first uses due to the heating of new components. Air the room and run the appliance at full power for a few hours.
How to reset the appliance?
Unplug the appliance for 5 minutes, then plug it back in. If the appliance does not turn on, check the circuit breaker or contact technical support.
Where can I find spare parts?
Spare parts are available from Dimplex customer service. Have the model number and part reference ready.
User questions about Sierra 48 DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fireplace in PDF format for free! Find your manual Sierra 48 - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sierra 48 by DIMPLEX.
USER MANUAL Sierra 48 DIMPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DIMPLEX
Model : Sierra 48
Category : Fireplace