N-130 - Effect machine Eurolite - Free user manual and instructions
Find the device manual for free N-130 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effect Machine (Fog/Smoke Machine) |
| Model | N-130 |
| Brand | Eurolite |
| Power Consumption | 1300 W |
| Power Supply | 230 V AC, 50 Hz |
| Warm-Up Time | Approx. 3-5 minutes |
| Fog Output | 150 m³/min |
| Fluid Capacity | 1 L |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 380 x 220 x 220 mm |
| Control Methods | DMX, Remote Control, Manual |
| Heater Type | Electrical Heating Element |
| Pump Type | High-Pressure Pump |
| Fluid Type | Water-Based Fog Fluid |
| Safety Features | Auto Shut-Off, Thermal Fuse |
| Maintenance | Clean with Distilled Water |
| Spare Parts | Heating Element, Pump, Fuse |
| Certifications | CE |
| Color | Black |
| Operating Temperature | 5°C to 40°C |
Frequently Asked Questions - N-130 Eurolite
How do I clean the Eurolite N-130 effect machine?
To clean the machine, use a mixture of distilled water and white vinegar (1:4 ratio). Run the solution through the machine until it clears, then flush with distilled water. Allow to dry completely before storage.
What type of fluid should I use?
Only use water-based fog fluid specifically designed for fog machines. Avoid oil-based fluids as they can damage the heater and pump.
How do I connect the machine to DMX?
Connect a DMX cable from your controller to the DMX input on the machine. Set the DMX address using the DIP switches or menu. Refer to the manual for address settings.
Why is the machine not producing fog?
Common causes include: the machine is not warmed up (wait 3-5 min), the fluid tank is empty, or the thermal fuse has tripped. Check these first.
How do I set up the remote control?
Plug the remote control into the remote jack on the machine. For wireless remotes, pair them following the instructions. Press the button to fog.
What is the warm-up time?
The warm-up time is approximately 3 to 5 minutes. The machine will indicate when it is ready, usually by a steady green light.
How should I store the machine?
Store the machine in a cool, dry place away from direct sunlight. Empty the fluid tank and clean the machine before long-term storage to prevent clogging.
Can I use water instead of fog fluid?
No, water is not recommended. It will not produce enough fog and may damage the heating element. Always use proper fog fluid.
How do I replace the fuse?
Unplug the machine. Locate the fuse holder near the power cord. Remove the old fuse and replace it with one of the same rating (e.g., 10A). Ensure the machine is off.
What is the power consumption of the N-130?
The power consumption is 1300 watts. Ensure your power outlet can handle this load and use a proper extension cord if needed.
User questions about N-130 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual N-130 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N-130 by Eurolite.
USER MANUAL N-130 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : N-130
Category : Effect machine