UPBS 12000 A1 - Uncategorized ULTIMATE SPEED - Free user manual and instructions
Find the device manual for free UPBS 12000 A1 ULTIMATE SPEED in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Jump Starter / Power Bank |
| Brand | Ultimate Speed |
| Model | UPBS 12000 A1 |
| Battery Capacity | 12000 mAh / 44.4 Wh |
| Peak Current | 400 A |
| Starting Current | 200 A |
| USB Output | 5 V / 2.1 A (two ports) |
| Input Charging | 5 V / 2 A (Micro USB) |
| Jump Start Output | 12 V / 200 A (peak 400 A) |
| Dimensions (L x W x H) | 200 x 100 x 30 mm |
| Weight | 480 g |
| LED Flashlight | Yes, with SOS and strobe modes |
| Safety Protections | Overcharge, overdischarge, short circuit, reverse polarity, overcurrent |
| Operating Temperature | -20°C to 60°C |
| Charging Time | 4-5 hours (via 5V/2A charger) |
| Maintenance | Wipe with a dry cloth; store in a cool, dry place; recharge every 3 months |
| Spare Parts / Repairability | No user-serviceable parts; do not disassemble |
| Included Accessories | Jumper cables, USB cable, user manual, carrying case |
Frequently Asked Questions - UPBS 12000 A1 ULTIMATE SPEED
How many times can the UPBS 12000 A1 jump start a car?
With a full charge, the UPBS 12000 A1 can typically jump start a 4-cylinder car engine up to 20 times, depending on battery size and temperature.
How long does it take to fully charge the power bank?
Using a 5V/2A charger, charging takes approximately 4-5 hours. Using a lower current charger will increase the time.
Can I charge my smartphone while using the jump start function?
No, for safety reasons the jump start output and USB output cannot be used simultaneously. Disconnect the jumper cables before charging devices.
What does the LED flashlight modes include?
The LED flashlight has three modes: constant on, SOS (distress signal), and strobe (fast flashing). Press the power button to cycle through modes.
Is the UPBS 12000 A1 safe to use in rain?
No, the device is not waterproof. Keep it dry and avoid using in rain or wet conditions to prevent electrical shock or damage.
How do I know if the device is fully charged?
The LED indicators show battery level: 4 LEDs for full, 1 LED for low. When all LEDs are solid and the charging light turns green, it's fully charged.
What engines can this jump starter start?
It is suitable for 12V engines up to 5.0L petrol or 3.0L diesel. For larger engines, a higher capacity model is recommended.
Can I leave the jump starter connected to the car battery?
No, disconnect the jumper cables immediately after starting the engine. Prolonged connection may damage the device or vehicle electronics.
How should I store the device when not in use?
Store in a cool, dry place away from direct sunlight. Recharge the battery every 3 months to maintain battery health.
What should I do if the device does not power on?
First, charge the device for at least 2 hours. If still not powering on, check the power button. If faulty, contact customer support. Do not disassemble.
User questions about UPBS 12000 A1 ULTIMATE SPEED
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual UPBS 12000 A1 - ULTIMATE SPEED and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UPBS 12000 A1 by ULTIMATE SPEED.