ALLEN & HEATH Xone:DX - DJ Equipment

Xone:DX - DJ Equipment ALLEN & HEATH - Free user manual and instructions

Find the device manual for free Xone:DX ALLEN & HEATH in PDF.

📄 67 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ALLEN & HEATH Xone:DX - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type 4-channel digital DJ mixer with integrated USB audio interface
Dimensions (W x D x H) 320 mm x 320 mm x 100 mm
Weight 3.5 kg
Power Supply 12V DC, 1.5A via external adapter
Inputs 2x phono line (RCA), 4x stereo line (RCA), 1x mic (XLR), 2x USB (type B)
Outputs 2x master (XLR + RCA), 2x booth (1/4" TRS), headphone (1/4" + 1/8")
Channels 4 channels with 3-band EQ, filters, and assignable FX
Effects Built-in digital effects: delay, reverb, echo, filter
Audio Interface 24-bit/96kHz, 4-in/4-out USB
MIDI Control Full MIDI mappable controls for software integration
Maintenance Clean with soft dry cloth; avoid liquids and solvents
Safety Use only supplied power adapter; avoid moisture; ensure ventilation
Repairability Modular design; spare parts available from authorized service centers
Compatible Software Traktor Pro, Serato DJ, Virtual DJ, Ableton Live
General Information Professional grade mixer for club/studio use; known for sound quality

Frequently Asked Questions - Xone:DX ALLEN & HEATH

How do I connect the Xone:DX to my computer?
Use a standard USB cable (type B to type A or C) to connect the USB port on the back of the mixer to your computer. Ensure you have installed the latest drivers from the Allen & Heath website. The mixer will appear as an audio device in your DJ software.
Can I use the Xone:DX with Serato DJ?
Yes, the Xone:DX is compatible with Serato DJ, though it may require a specific driver or firmware update. Check the Allen & Heath support page for Serato compatibility details.
How do I adjust the crossfader curve?
The crossfader curve can be adjusted via a trim pot on the underside of the mixer. Remove the bottom panel and locate the crossfader adjustment. Consult the manual for exact location and recommended settings.
The sound is distorted; what should I do?
Check that the input gain levels are not too high. Ensure your software audio output is not clipping. Verify that the master output level is appropriate. If using external effects, ensure they are not overloading the signal.
How do I replace the fader caps?
Fader caps are removable by gently pulling upward. To reattach, align the cap with the fader shaft and press down firmly. Replacement caps can be purchased from Allen & Heath dealers.
The mixer does not power on. What could be wrong?
First, check that the power adapter is properly connected to the mixer and a working power outlet. Try a different outlet. If it still doesn't work, inspect the adapter for damage. If necessary, contact Allen & Heath support for a replacement.
Can I use the Xone:DX without a computer?
Yes, the Xone:DX functions as a standalone analog mixer. You can connect turntables, CD players, or other line-level sources directly to the input channels and mix without a computer.
How do I assign effects to a channel?
Press the FX assign button on the desired channel to send the signal to the internal effects. Then select the effect type using the FX selector knob. Adjust the FX send level and wet/dry mix using the dedicated knobs.
The microphone channel is not working. What should I check?
Ensure the microphone is properly connected to the XLR input. Check that the mic gain knob is turned up and the channel fader is raised. Verify that the mic channel is not muted and that the routing is set correctly.
How do I update the firmware?
Download the latest firmware from the Allen & Heath website. Connect the mixer to your computer via USB, run the firmware updater, and follow the on-screen instructions. Do not disconnect the power or USB during the update.

User questions about Xone:DX ALLEN & HEATH

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your DJ Equipment in PDF format for free! Find your manual Xone:DX - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Xone:DX by ALLEN & HEATH.

USER MANUAL Xone:DX ALLEN & HEATH

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ALLEN & HEATH

Model : Xone:DX

Category : DJ Equipment