ALLEN & HEATH Xone:1D - DJ Equipment

Xone:1D - DJ Equipment ALLEN & HEATH - Free user manual and instructions

Find the device manual for free Xone:1D ALLEN & HEATH in PDF.

📄 14 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ALLEN & HEATH Xone:1D - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type DJ Mixer / Controller
Brand Allen & Heath
Model Xone:1D
Channels 4
Audio Interface Built-in USB soundcard (16-bit/44.1kHz)
Inputs 4x Line (RCA), 2x Phono (RCA), 2x Mic (XLR/Jack), 1x AUX (Jack)
Outputs 2x Master (XLR), 1x Booth (Jack), 1x Record (RCA), 1x Headphone (Jack)
EQ 3-band EQ per channel (High, Mid, Low)
Filters Resonant high-pass/low-pass filter per channel
Crossfader Replaceable crossfader
MIDI Control Full MIDI assignable controls via USB
Dimensions (W x D x H) 320 mm x 250 mm x 85 mm
Weight 3.5 kg
Power Supply 12V DC, 1.5A (external adapter)
Power Consumption 18W max
Construction Steel chassis with aluminum faceplate
Cleaning Use a soft, dry cloth; avoid solvents
Safety Keep away from liquids; do not open casing; use only supplied power adapter
Spare Parts Contact Allen & Heath support for crossfader, knobs, etc.
Repairability Serviceable by qualified technicians; schematics available
Warranty 2 years (depending on region)

Frequently Asked Questions - Xone:1D ALLEN & HEATH

How do I connect the Xone:1D to my computer?
Use a standard USB cable to connect the USB port on the mixer to your computer. The built-in soundcard will be recognized as an audio device. You may need to install drivers from the Allen & Heath website if using Windows.
Why is there no sound from the master output?
Check that the master volume is turned up, the channel faders are up, and the correct input source is selected. Ensure the soundcard settings on your computer are set to output to the mixer.
Can I use the Xone:1D without a computer?
Yes, it operates as a standard analog mixer without a computer. Connect your audio sources (turntables, CDJs, etc.) directly to the line/phono inputs.
How do I assign MIDI controls for DJ software?
In your DJ software (e.g., Traktor, Serato), enter the MIDI mapping mode and move the desired control on the Xone:1D. The software will detect the MIDI message. Assign it to the corresponding function.
What is the difference between the Xone:1D and other Allen & Heath mixers?
The Xone:1D is a 4-channel mixer with a built-in USB soundcard and extensive MIDI control surface, designed for digital DJs. It lacks the analog warmth of higher-end models like the Xone:92 but offers digital integration.
How do I reset the Xone:1D to factory settings?
There is no user-accessible factory reset. To restore default settings, disconnect power, wait 30 seconds, and reconnect. MIDI mappings may need to be reassigned in your software.
My phono input sounds distorted. What should I do?
Ensure the input is set to 'Phono' (not 'Line') via the rear switch. Turntables with moving magnet cartridges require a phono preamp stage, which the mixer provides.
Can I use the Xone:1D with a microphone?
Yes, it has two microphone inputs on the top panel with individual level controls and EQ. Use a dynamic microphone for best results.
How do I update the firmware on the Xone:1D?
Check the Allen & Heath website for firmware updates. Download the firmware file and use a utility (e.g., Sysex Librarian) to send it via MIDI to the mixer's MIDI input.
The crossfader is scratchy. How can I fix it?
First, clean the crossfader with a contact cleaner spray. Remove the faceplate and gently spray into the fader slot while moving it. If issue persists, replace the crossfader unit.

User questions about Xone:1D ALLEN & HEATH

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your DJ Equipment in PDF format for free! Find your manual Xone:1D - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Xone:1D by ALLEN & HEATH.

USER MANUAL Xone:1D ALLEN & HEATH

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ALLEN & HEATH

Model : Xone:1D

Category : DJ Equipment