CMS 1600-3 - Mixer DYNACORD - Free user manual and instructions
Find the device manual for free CMS 1600-3 DYNACORD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mixing Console |
| Brand | Dynacord |
| Model | CMS 1600-3 |
| Number of Channels | 16 mono channels |
| Input Connectors | XLR and 1/4" TRS |
| Output Connectors | Main L/R (XLR), mono sum (XLR), 4 aux sends (1/4" TRS) |
| Frequency Response | 20 Hz – 20 kHz (±1 dB) |
| Total Harmonic Distortion | < 0.01% @ 1 kHz |
| Equalization | 3-band per channel (HF, MF, LF) |
| Phantom Power | +48 V, switchable per channel |
| Built-in Effects | None (external effects via aux sends) |
| Power Supply | Internal, 100–240 V AC, 50/60 Hz |
| Power Consumption | 50 W |
| Dimensions (W x H x D) | 482 mm x 133 mm (3U) x 250 mm |
| Weight | 8.5 kg |
| Mounting | 19" rack-mountable |
| Maintenance | Clean with a dry, lint-free cloth; avoid liquids |
| Safety | Do not expose to rain or moisture; use grounded outlet |
| Spare Parts | Available through authorized Dynacord service centers |
| Repair | Only certified technicians should service the unit |
| General Information | Professional analog mixing console for live sound and installation |
Frequently Asked Questions - CMS 1600-3 DYNACORD
How do I connect a microphone to the CMS 1600-3?
Connect your microphone to an XLR input on one of the mono channels. Ensure that phantom power (+48V) is enabled if using a condenser microphone.
How can I use external effects with this mixer?
Use an aux send to route signal to an external effects processor. The processed signal returns via an aux return or an unused mono input.
What is the correct procedure to power on/off?
Power on: Turn down all volume faders, then switch on the power supply. Power off: Turn down faders, then switch off. This prevents audio pops.
How do I adjust the EQ on a channel?
Each mono channel has a 3-band equalizer: HF (high frequencies), MF (mid), and LF (low). Rotate the knobs to boost or cut frequencies.
Can I use the mixer without a rack?
Yes, the CMS 1600-3 can be placed on a flat surface. Rack ears are included for optional 19-inch rack mounting.
How do I avoid feedback during a live performance?
Keep microphones away from speakers, reduce gain on the input channel, and use the EQ to cut frequencies that cause feedback. Also, position speakers in front of the microphones.
What is the function of the mute button?
The mute button silences the channel's signal from the main mix and aux sends. It is useful for muting unused channels temporarily.
How do I record the main mix?
Connect the main L/R outputs (XLR) to your recording device. Use the main fader to adjust the level. Ensure the recording device has appropriate input sensitivity.
What should I do if a channel has no sound?
Check that the channel fader and gain are turned up, the pad is not engaged incorrectly, and the mute button is off. Also verify cable connections and that the input source is active.
How do I clean the mixer?
Use a soft, dry cloth to wipe the surface. Do not use solvents or water. For faders, compressed air can be used to remove dust. Regular cleaning prevents buildup.
User questions about CMS 1600-3 DYNACORD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual CMS 1600-3 - DYNACORD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMS 1600-3 by DYNACORD.
USER MANUAL CMS 1600-3 DYNACORD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DYNACORD
Model : CMS 1600-3
Category : Mixer