WG602v3 - Access Point NETGEAR - Free user manual and instructions
Find the device manual for free WG602v3 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | WG602v3 |
| Brand | Netgear |
| Wireless Standard | IEEE 802.11g/b |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 54 Mbps |
| Ethernet Ports | 1 x 10/100 Mbps RJ-45 |
| Antenna | 2 internal fixed antennas |
| Security | WEP, WPA, WPA2, MAC address filtering |
| Power Supply | 5V DC, 2.5A |
| Power Consumption | 6W max |
| Dimensions (W x D x H) | 175 x 118 x 28 mm |
| Weight | 330 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 90% non-condensing |
| LED Indicators | Power, LAN, WLAN |
| Management | Web-based interface, SNMP |
| Mounting | Desktop or wall mount |
| Compliance | FCC, CE, RoHS |
Frequently Asked Questions - WG602v3 NETGEAR
How do I reset the Netgear WG602v3 to factory defaults?
Locate the reset button on the back panel. Use a paperclip to press and hold the button for 5 seconds until the power LED blinks. The device will reboot with factory settings.
What is the default IP address of the WG602v3?
The default IP address is 192.168.0.227. You can access the web interface by entering this IP in your browser after connecting via Ethernet.
Can the WG602v3 be used as a wireless repeater?
No, the WG602v3 is a pure access point. It does not support repeater mode. It can be configured as a wireless bridge (client mode) to extend a wired network.
Which security protocols does the WG602v3 support?
It supports WEP, WPA, and WPA2 (Personal). WPA2 is recommended for better security. MAC address filtering is also available.
How many users can connect to the WG602v3 simultaneously?
The WG602v3 can handle up to 30 concurrent wireless clients, depending on network traffic and environment.
Can I mount the WG602v3 on a wall?
Yes, the device has mounting slots on the bottom for wall mounting. Use appropriate screws and anchors for your wall type.
What power adapter does the WG602v3 require?
It requires a 5V DC, 2.5A power adapter with a barrel connector. Using an incorrect adapter may damage the device.
Does the WG602v3 support Power over Ethernet (PoE)?
No, the WG602v3 does not support PoE. It must be powered via the included AC adapter.
How do I update the firmware on the WG602v3?
Download the latest firmware from Netgear's support website. Log into the web interface, go to Administration > Firmware Upgrade, and upload the file. Do not power off during upgrade.
What is the wireless range of the WG602v3?
Indoor range is typically up to 100 meters (328 feet), and outdoor up to 300 meters (984 feet), but actual range depends on obstacles and interference.
User questions about WG602v3 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WG602v3 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WG602v3 by NETGEAR.
USER MANUAL WG602v3 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : WG602v3
Category : Access Point