KS 1500T E - Milling machine Könner & Söhnen - Free user manual and instructions
Find the device manual for free KS 1500T E Könner & Söhnen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Milling Machine |
| Model | KS 1500T E |
| Brand | Könner & Söhnen |
| Power Supply | 230 V / 50 Hz |
| Motor Power | 1500 W |
| Spindle Speed Range | 0 - 3000 RPM (Variable) |
| Table Dimensions (L x W) | 700 x 200 mm |
| Travel X-Axis | 450 mm |
| Travel Y-Axis | 200 mm |
| Travel Z-Axis | 300 mm |
| Max Spindle to Table Distance | 400 mm |
| Spindle Taper | MT3 (Morse Taper #3) |
| Digital Readout (DRO) | Yes, 3-axis |
| Weight (approx.) | 180 kg |
| Dimensions (L x W x H) | 1050 x 700 x 1500 mm |
| Main Functions | Milling, Drilling, Boring, Slotting |
| Maintenance | Regular lubrication of slideways and spindle, clean chips after use |
| Safety Features | Emergency stop, spindle guard, overload protection |
| Spare Parts Availability | Through authorized dealers or manufacturer website |
| Included Accessories | Clamping kit, drawbar, chuck with key, wrench |
Frequently Asked Questions - KS 1500T E Könner & Söhnen
What safety precautions should I take before using the KS 1500T E milling machine?
Always wear safety glasses and avoid loose clothing. Ensure the emergency stop is functional and the spindle guard is in place. Never leave the machine unattended while running.
How do I change the spindle speed on the KS 1500T E?
The spindle speed is variable via the electronic control knob. Turn the knob to adjust RPM within the range of 0 to 3000 RPM. Consult the manual for recommended speeds for different materials.
What type of lubrication does the machine require?
Use a light machine oil for slideways and a grease for the spindle bearings. Lubricate after every 8 hours of operation. Refer to the manual for detailed intervals.
How do I set up the digital readout (DRO)?
The DRO is pre-calibrated. Turn it on using the power button. Use the axis keys to zero out at your reference point. The display shows absolute and incremental positions.
What is the maximum workpiece weight the table can handle?
The table is designed to support workpieces up to approximately 50 kg. Distribute the load evenly to avoid damaging the lead screws.
Can I use the KS 1500T E for drilling as well?
Yes, the machine can perform drilling operations using a drill chuck. Ensure the spindle speed is set appropriately for the drill bit size and material.
How do I clean the machine after use?
Remove chips using a brush or vacuum. Wipe down surfaces with a clean cloth. Avoid using compressed air as it may force debris into bearings.
What should I do if the spindle makes unusual noise?
Stop the machine immediately and check for loose drawbar or tool. If noise persists, inspect spindle bearings for wear. Contact service if needed.
Are spare parts readily available for the KS 1500T E?
Yes, spare parts can be ordered through Könner & Söhnen authorized dealers or the official website. Common parts include belts, bearings, and switches.
How do I align the table for accurate milling?
Use a dial indicator mounted on the spindle. Move the table along X and Y axes to check alignment. Adjust gibs and set screws to eliminate play.
User questions about KS 1500T E Könner & Söhnen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Milling machine in PDF format for free! Find your manual KS 1500T E - Könner & Söhnen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KS 1500T E by Könner & Söhnen.
USER MANUAL KS 1500T E Könner & Söhnen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Könner & Söhnen
Model : KS 1500T E
Category : Milling machine