KS 1000T E - Milling machine Könner & Söhnen - Free user manual and instructions
Find the device manual for free KS 1000T E Könner & Söhnen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Milling Machine |
| Brand | Könner & Söhnen |
| Model | KS 1000T E |
| Motor Power | 1000 W |
| Power Supply | 230 V / 50 Hz |
| Spindle Speed Range | 0 - 3000 rpm (variable) |
| Table Size | 500 x 200 mm |
| X-Axis Travel | 300 mm |
| Y-Axis Travel | 150 mm |
| Z-Axis Travel | 200 mm |
| Overall Dimensions (L x W x H) | 800 x 600 x 400 mm |
| Net Weight | 50 kg |
| Digital Readout | Yes (3-axis) |
| Emergency Stop | Yes |
| Chuck Type | ER25 collet chuck |
| Coolant System | Not included (optional) |
| Maintenance | Regular cleaning and lubrication of slideways |
| Safety Features | Emergency stop switch, spindle guard, safety glasses recommended |
| Spare Parts Availability | Contact manufacturer or authorized dealers |
| Included Accessories | Collet set, wrench, manual, power cord |
Frequently Asked Questions - KS 1000T E Könner & Söhnen
What is the maximum spindle speed of the KS 1000T E?
The maximum spindle speed is 3000 rpm, variable speed control allows adjustment from 0 to 3000 rpm.
What voltage and frequency does the machine require?
It requires a 230 V / 50 Hz single-phase power supply.
How do I change the collet on this milling machine?
Use the provided collet wrench to loosen the drawbar. Replace the collet with the desired size and tighten securely. Always disconnect power before changing tooling.
What safety precautions should I take when operating the KS 1000T E?
Always wear safety glasses, avoid loose clothing, keep hands away from moving parts, and use the emergency stop if necessary. Ensure the workpiece is securely clamped.
How often should I lubricate the machine?
Lubricate the slideways and leadscrews every 8 hours of operation or as recommended in the manual. Use a light machine oil.
Can I use a coolant system with this machine?
The machine does not come with a coolant system, but you can add an optional coolant system if needed. Ensure it is compatible with the table design.
What is the table size and travel distances?
Table size is 500 x 200 mm. X-axis travel is 300 mm, Y-axis 150 mm, and Z-axis 200 mm.
How do I clean the machine after use?
Remove chips and dust with a brush or vacuum. Clean the table and slideways with a soft cloth and apply a light coat of oil to prevent rust.
Where can I find spare parts for the KS 1000T E?
Spare parts are available directly from Könner & Söhnen or authorized dealers. Contact customer support with your model and serial number.
What is the weight of the milling machine?
The net weight is approximately 50 kg. Ensure the workbench or stand can support this weight.
User questions about KS 1000T E Könner & Söhnen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Milling machine in PDF format for free! Find your manual KS 1000T E - Könner & Söhnen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KS 1000T E by Könner & Söhnen.
USER MANUAL KS 1000T E Könner & Söhnen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Könner & Söhnen
Model : KS 1000T E
Category : Milling machine