Eurolite

LED FE-700 - Lighting Eurolite - Free user manual and instructions

Find the device manual for free LED FE-700 Eurolite in PDF.

📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Eurolite LED FE-700 - page 17
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeLED Effect Light
BrandEurolite
ModelLED FE-700
Power Consumption36 W
Light Source7 x 10 W RGBW LEDs
DMX Channels4/8/12 selectable
Beam Angle25°
Dimensions (L x W x H)240 x 200 x 140 mm
Weight1.6 kg
Power Supply100-240 V AC, 50/60 Hz
Housing MaterialAluminum, black finish
CoolingPassive cooling via finned heat sink
Protection RatingIP20
Operating Temperature-10°C to 40°C
FeaturesRDM, Master/Slave, Standalone, Sound-to-Light
Accessories IncludedPower cord, DMX cable, mounting bracket, manual
MaintenanceClean lenses with dry cloth; avoid water ingress
SafetyDo not operate without housing; ensure proper ventilation
Spare PartsLED modules, power supply, fuses available from dealer

Frequently Asked Questions - LED FE-700 Eurolite

How do I connect the LED FE-700 to a DMX controller?
Use a standard 3-pin XLR cable. Set the DMX address via the display and buttons. Ensure termination on the last fixture.
What power supply is required?
The unit accepts 100-240 V AC, 50/60 Hz via the included IEC power cord.
Can I use the fixture in stand-alone mode?
Yes, select standalone mode in the menu and choose a built-in program or sound-activated mode.
How do I clean the LED lenses?
Disconnect power. Gently wipe with a soft, dry cloth. Do not use liquids or abrasive cleaners.
What does RDM enable?
RDM (Remote Device Management) allows remote DMX addressing and diagnostics from a compatible controller.
What is the maximum number of fixtures in a daisy chain?
Up to 32 units can be daisy chained via DMX in/out. Use proper termination for longer runs.
Why does the fixture not power on?
Check the power connection, fuse (replace if blown), and ensure the mains switch is on.
Can I replace the LEDs myself?
LED modules are not user-serviceable. Contact authorized service for replacement.
What safety precautions should I observe?
Always secure the fixture with a safety cable. Keep away from moisture and flammable materials. Ensure adequate ventilation.
How do I update the firmware?
Firmware updates are not user-accessible. Consult Eurolite support if needed.

User questions about LED FE-700 Eurolite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual LED FE-700 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED FE-700 by Eurolite.

USER MANUAL LED FE-700 Eurolite

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eurolite

Model : LED FE-700

Category : Lighting