LED KLS-200 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED KLS-200 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED lighting effect fixture |
| Model | LED KLS-200 |
| Brand | Eurolite |
| Dimensions (L x W x H) | Approx. 290 x 230 x 120 mm |
| Weight | Approx. 2.5 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | Max. 200 W |
| Light Source | 12 x 3W RGB LEDs (or similar) |
| Color Mixing | RGB color mixing |
| Control Modes | DMX, stand-alone, master/slave, sound-activated |
| DMX Channels | 7 or 10 channels (selectable) |
| Beam Angle | 25° |
| Housing Material | Metal and flame-retardant plastic |
| Mounting Options | Floor stand, truss mount via brackets |
| Cooling | Passive convection cooling (no fan) |
| Operating Temperature | -10°C to 40°C |
| Protection Rating | IP20 (indoor use only) |
| Maintenance | Clean housing with dry cloth; no liquids |
| Safety | Use only indoors; disconnect power before cleaning |
| Spare Parts | Contact Eurolite service for replacement LEDs or power supply |
| Included Accessories | Power cord, user manual |
Frequently Asked Questions - LED KLS-200 Eurolite
What is the LED KLS-200 used for?
The Eurolite LED KLS-200 is a compact LED lighting effect fixture designed for mobile DJs, bands, and small venues to create colorful light shows.
How do I connect the fixture to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input of the fixture to the DMX output of your controller. Set the DMX address using the menu buttons on the rear panel.
Can I use the LED KLS-200 without a DMX controller?
Yes, the fixture has built-in standalone modes including automatic color chases, sound activation, and master/slave operation for synchronized shows without a controller.
What is the maximum number of fixtures I can daisy-chain?
You can daisy-chain up to 32 fixtures via DMX in master/slave mode. However, for longer chains, use a DMX signal amplifier to maintain signal integrity.
How do I clean the LED KLS-200?
Disconnect the power first. Use a soft, dry cloth to wipe the housing. Do not use any liquids or solvents as they may damage the fixture.
What should I do if the fixture stops working?
Check the power connection and fuse. Ensure the DMX cable is properly connected. If the issue persists, contact Eurolite customer support for replacement parts or service.
Can I mount the fixture on a truss?
Yes, the fixture has mounting brackets. Secure it with a safety cable and ensure the truss can support the weight (approx. 2.5 kg).
What is the beam angle of the LEDs?
The beam angle is 25°, which provides a narrow beam suitable for spotlight effects or tight group washes.
How do I reset the fixture to factory settings?
Press and hold the 'Menu' button until the display shows 'RESET' or navigate to the system settings and select 'Factory Reset'. Confirm to restore default settings.
Is the LED KLS-200 suitable for outdoor use?
No, the fixture has an IP20 rating, meaning it is only for indoor use. Exposing it to moisture or dust can cause damage and safety hazards.
User questions about LED KLS-200 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED KLS-200 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED KLS-200 by Eurolite.
USER MANUAL LED KLS-200 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED KLS-200
Category : Lighting