AMD 352/1 - Air conditioner WHIRLPOOL - Free user manual and instructions

Product Type	Air conditioner (split system)
Brand	Whirlpool
Model	AMD 352/1
Cooling Capacity	3.5 kW (approx. 12,000 BTU/h)
Power Supply	220-240 V ~ 50 Hz
Indoor Unit Noise Level	Approx. 35 dB (low speed)
Airflow Direction Control	Vertical and horizontal swing
Air Filter	Washable anti-dust filter
Operating Modes	Cool, Heat, Fan, Dry, 6th Sense
6th Sense Function	Automatically adjusts settings for comfort
Timer	24-hour programmable timer
Remote Control	Included
Refrigerant	R32
Indoor Unit Dimensions (W x H x D)	800 x 285 x 195 mm
Indoor Unit Weight	9.5 kg
Outdoor Unit Dimensions (W x H x D)	700 x 500 x 250 mm
Outdoor Unit Weight	30 kg
Energy Efficiency Class	A+
Installation Type	Wall-mounted with outdoor compressor unit
Maintenance	Cleanable air filter
Safety Features	Overheat protection, auto restart
Included Accessories	Remote control, mounting kit
Repairability	Spare parts available for major components

Frequently Asked Questions - AMD 352/1 WHIRLPOOL

How do I clean the air filter on my Whirlpool AMD 352/1?

Turn off the unit and disconnect the power. Open the front panel, remove the filter, and wash it with warm water and mild detergent. Dry it completely before reinstalling. Clean the filter every 2 weeks for optimal performance.

What is the 6th Sense function and how does it work?

The 6th Sense mode automatically detects the ambient temperature and adjusts the set temperature, fan speed, and operation mode to maintain a comfortable environment while saving energy.

How can I use the swing function?

Press the Swing button on the remote control to activate the horizontal louvers moving up and down. Press again to stop them at a desired angle.

The air conditioner does not cool effectively. What should I check?

Check the air filter for dirt, ensure the temperature is set lower than the room temperature, verify that the doors and windows are closed, and confirm that the outdoor unit is not blocked by obstacles.

How do I set the timer on this air conditioner?

Use the Timer button on the remote to select the desired on/off time. The unit will automatically start or stop after the programmed period. The 24-hour timer allows you to schedule operation.

Is it possible to use the air conditioner as a heater?

If your model is a heat pump, you can use the Heat mode to warm the room. The AMD 352/1 may have heating capability, but refer to the manual for specific heating operation instructions.

What should I do if the remote control stops working?

Check that batteries are inserted correctly and are not depleted. Remove any obstacles between the remote and the indoor unit receiver. Reset the remote by removing the batteries and pressing each key for a few seconds, then reinsert them.

How often should I perform maintenance on my air conditioner?

It is recommended to clean the air filter every 2 weeks, and to have a professional service check the refrigerant levels, electrical connections, and general operation at least once a year.

What does the "Dry" mode do?

The Dry mode removes excess moisture from the air by running the fan and compressor in a low-speed dehumidification cycle. It helps reduce humidity without excessive cooling.

How do I reset the air conditioner to factory settings?

To reset the unit, turn it off and unplug it for a few minutes. Alternatively, press the Reset button on the remote (if available) or hold the mode button for 5 seconds to restore default settings.

USER MANUAL AMD 352/1 WHIRLPOOL

Εσωτερική μονάδα

8. KOYMΠI SWING (Talavτωση)

ΤΡΟΠΟΣ ΛΕΙΤΟΥΡΓΙΑΣ 6th SENSE

Eik. A

Eik. B

Eik. C

Eik. D

Θερμική μόνωση