LED FE-300 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED FE-300 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Effect Light |
| Model | LED FE-300 |
| Brand | Eurolite |
| Light Source | 300W LED |
| Beam Angle | 25° |
| DMX Channels | 2/4/8 selectable |
| Control Modes | DMX, Master/Slave, Auto, Sound-Active |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 320W |
| Dimensions (L x W x H) | 295 x 235 x 265 mm |
| Weight | 4.2 kg |
| Housing | Metal, black |
| Cooling | Fan, silent |
| Connectivity | 3-pin DMX in/out, IEC power in/out |
| Display | LED with 4 buttons |
| Effects | Color mixing RGBW, strobe, dimmer |
| Mounting | Floor stand or hanging bracket |
| Accessories Included | Power cord, DMX cable, mounting bracket |
| Safety | Class I, IP20 indoor use |
| Maintenance | Clean with dry cloth, no solvents |
| Repairability | Serviceable by qualified technician |
| Warranty | 2 years |
Frequently Asked Questions - LED FE-300 Eurolite
How do I connect the LED FE-300 to a DMX controller?
Use a standard 3-pin DMX cable to connect the DMX OUT of the controller to the DMX IN of the fixture. Set the DMX address on the fixture using the LED display and buttons. Refer to the DMX channel chart in the manual.
Can I daisy-chain multiple FE-300 fixtures?
Yes, connect the DMX OUT of the first fixture to the DMX IN of the next. The total number of daisy-chained fixtures depends on the cable length and signal quality. It is recommended to use a DMX terminator at the end.
What is the maximum power consumption?
The maximum power consumption is approximately 320W at full load. Ensure the power supply can handle the total load when chaining multiple fixtures.
How do I clean the fixture?
Disconnect the fixture from power before cleaning. Use a soft, dry cloth to wipe the housing and lens. Do not use abrasive cleaners or solvents, as they may damage the coating.
What is the recommended mounting method?
The fixture can be placed on a stable floor surface or hung using the included mounting bracket. Ensure the bracket is securely tightened and the structure can support the weight of 4.2 kg.
Does the FE-300 have sound activation?
Yes, the fixture includes a sound-active mode that responds to music via a built-in microphone. Select 'Sound' mode in the menu to enable automatic color changes synced to the beat.
How do I replace the LED unit?
The LED unit is not user-replaceable. If the LED fails, contact Eurolite service or a qualified technician for repair. Attempting to replace it yourself may void the warranty.
What is the IP rating?
The fixture has an IP20 rating, meaning it is protected against solid objects larger than 12.5 mm but not against water. Use only indoors in dry locations.
Can I use the FE-300 outdoors?
No, this fixture is designed for indoor use only. Exposure to rain or moisture can cause electrical shock and damage. Use a weatherproof housing if outdoor use is necessary.
How do I update the firmware?
Firmware updates are typically not user-serviceable. Check the Eurolite website for any available updates and follow the provided instructions. Some updates may require a special interface.
User questions about LED FE-300 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED FE-300 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED FE-300 by Eurolite.
USER MANUAL LED FE-300 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED FE-300
Category : Lighting