Omnitronic

FAS 2 - Microphone Omnitronic - Free user manual and instructions

Find the device manual for free FAS 2 Omnitronic in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Omnitronic FAS 2 - page 18
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Omnitronic
Model FAS 2
Product Type Dynamic Vocal Microphone
Polar Pattern Cardioid
Frequency Response 50 Hz – 16 kHz
Impedance 600 ohms
Sensitivity -74 dB ± 3 dB (1 kHz, 1 Pa)
Connector 3-pin XLR
Dimensions (Diameter x Length) 50 mm x 180 mm
Weight 0.3 kg
Cable Length 3 m (detachable)
Material Zinc die-cast body, steel mesh grille
Color Black
Includes Microphone clip, stand adapter, windscreen
Maintenance Clean with dry cloth; keep away from moisture
Safety Avoid strong magnetic fields; do not disassemble
Spare Parts Replacement windscreen available
Repairability Professional service recommended for repairs
Warranty 2 years limited warranty

Frequently Asked Questions - FAS 2 Omnitronic

What is the Omnitronic FAS 2 microphone suitable for?
The Omnitronic FAS 2 is a dynamic microphone designed for vocal performances, public speaking, and karaoke. Its cardioid polar pattern minimizes background noise.
Does the FAS 2 require phantom power?
No, it is a dynamic microphone and does not require phantom power. It works with standard XLR inputs.
What type of connector does the FAS 2 use?
It uses a standard 3-pin XLR connector. The microphone comes with a detachable XLR cable.
Can I use the FAS 2 with a wireless system?
Yes, you can connect the XLR output to a wireless transmitter that has an XLR input.
How do I clean the FAS 2 microphone?
Clean the body with a soft dry cloth. For the grille, gently remove it and wash with mild soap and water, then dry thoroughly before use.
Does the FAS 2 come with a stand adapter?
Yes, it includes a microphone clip and a standard stand adapter (5/8 inch thread) for mounting on a mic stand.
What is the frequency response of the FAS 2?
The frequency response is 50 Hz to 16 kHz, tailored for clear vocal reproduction.
Is the FAS 2 suitable for recording instruments?
While primarily a vocal microphone, it can be used for miking guitar amps or drums with good results, though a dedicated instrument mic may be better.
How do I replace the windscreen?
Gently pull off the old windscreen and push a new one over the grille. Ensure it fits snugly.
What should I do if the microphone has no sound?
Check the XLR cable connection, ensure the mixer or interface is powered on and the channel is unmuted. Test with another cable if possible.

User questions about FAS 2 Omnitronic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Microphone in PDF format for free! Find your manual FAS 2 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FAS 2 by Omnitronic.

USER MANUAL FAS 2 Omnitronic

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Omnitronic

Model : FAS 2

Category : Microphone