REQ512X - Video camera HAGER - Free user manual and instructions
Find the device manual for free REQ512X HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Camera |
| Brand | Hager |
| Model | REQ512X |
| Dimensions (W x H x D) | 120 x 80 x 75 mm |
| Weight | 350 g |
| Power Supply | 12V DC / Power over Ethernet (PoE) |
| Video Resolution | 1920 x 1080 (Full HD) |
| Night Vision | IR LEDs up to 30m |
| Field of View | 90° (horizontal) |
| Connectivity | Ethernet (RJ45), Wi-Fi (802.11 b/g/n) |
| Motion Detection | Built-in PIR sensor |
| Storage | MicroSD card up to 128GB, NVR support |
| Weatherproof Rating | IP66 |
| Mounting | Wall mount bracket included |
| Operating Temperature | -20°C to 50°C |
| Audio | Built-in microphone and speaker |
| Compatibility | ONVIF compliant |
| Power Consumption | 8W max |
| Reset Button | Yes, on device |
| Warranty | 2 years |
Frequently Asked Questions - REQ512X HAGER
How do I connect the Hager REQ512X camera to my network?
You can connect via Ethernet (plug the RJ45 cable into your router) or Wi-Fi. For Wi-Fi, press the WPS button on the camera and on your router within 2 minutes. Alternatively, use the mobile app to configure Wi-Fi.
How to reset the camera to factory settings?
Press and hold the reset button on the camera for about 10 seconds until the LED indicator flashes rapidly. The camera will reboot and restore default settings.
What is the maximum MicroSD card capacity supported?
The camera supports MicroSD cards up to 128GB. For best performance, use a Class 10 or UHS-I card.
Can I view the camera remotely?
Yes, download the Hager SmartView app on your smartphone. After adding the camera via the app, you can view live stream, playback recordings, and receive motion alerts.
How to clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. Do not use any chemical cleaners or abrasive materials, as they may damage the lens coating.
Does the camera support two-way audio?
Yes, the REQ512X has a built-in microphone and speaker. You can speak and listen through the mobile app.
What is the night vision range?
The infrared LEDs provide effective night vision up to 30 meters in complete darkness. The image remains black and white during night mode.
How to mount the camera outdoors?
Use the included wall mount bracket and screws. Ensure the mounting surface is solid. Route the Ethernet cable inside the wall for weatherproofing. The camera is IP66 rated, so it can withstand rain and dust.
Why is my camera not detecting motion?
Check that motion detection is enabled in the app settings. Ensure the PIR sensor is not blocked. Adjust the sensitivity level. Also verify that the camera is not in night mode without IR, as motion detection works best with good lighting.
How to update the camera firmware?
In the Hager SmartView app, go to device settings and select 'Firmware Update'. If an update is available, follow the on-screen instructions. Ensure the camera remains powered and connected during the update.
User questions about REQ512X HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video camera in PDF format for free! Find your manual REQ512X - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REQ512X by HAGER.