BKSAR10 - Underfloor heating HAGER - Free user manual and instructions
Find the device manual for free BKSAR10 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Underfloor heating thermostat |
| Brand | Hager |
| Model | BKSAR10 |
| Application | Electric underfloor heating control |
| Power Supply | 230 V ~ 50 Hz |
| Maximum Load | 10 A (resistive) |
| Temperature Range | 5 °C to 40 °C |
| Display | LCD with backlight |
| Control Type | Electronic, programmable |
| Programmable | Yes, 7-day schedule |
| Sensor Type | Floor and/or room temperature sensor |
| Protection Class | IP21 |
| Dimensions (H x W x D) | 85 x 85 x 45 mm |
| Weight | Approx. 150 g |
| Mounting | Wall-mounted (flush or surface) |
| Power Consumption | < 1 W standby |
| Child Lock | Yes |
| Frost Protection | Yes, adjustable |
| Compliance | CE, RoHS |
| Warranty | 2 years |
Frequently Asked Questions - BKSAR10 HAGER
How do I install the BKSAR10 thermostat?
The installation should be carried out by a qualified electrician. The thermostat is designed for wall mounting. Connect the load (underfloor heating) and sensor according to the wiring diagram in the manual. Ensure the power is off before installation.
Can I set different temperatures for different days?
Yes, the BKSAR10 supports a 7-day programmable schedule. You can set up to 4 temperature changes per day, each with a different temperature.
What type of floor sensor is compatible?
The thermostat works with a standard NTC thermistor floor sensor (10 kΩ at 25 °C). The sensor is typically included or can be purchased separately.
How do I reset the thermostat to factory settings?
Press and hold the menu button for 10 seconds until the display shows 'RESET'. Confirm by pressing the OK button. All settings will return to default.
Why is my floor not heating up?
Check if the thermostat is powered and set to a temperature above current floor temperature. Verify that the circuit breaker is on and the floor sensor is properly connected. If the issue persists, contact Hager support.
What is the maximum load for this thermostat?
The maximum load is 10 A for resistive loads. For inductive loads (e.g., pumps), it is 2 A. Ensure your heating system does not exceed these limits.
Can I use this thermostat with a wet underfloor heating system?
No, the BKSAR10 is designed for electric underfloor heating systems. For water-based systems, you need a different type of thermostat.
How do I activate the child lock?
Press and hold the up and down arrow keys simultaneously for 5 seconds. The display will show a lock icon. Repeat to disable.
What is the floor temperature limit?
The floor temperature can be limited to a maximum of 27 °C for comfort or 35 °C for other applications. This setting is adjustable in the menu.
Where can I download the user manual?
The user manual is available for free download in PDF format on notice-facile.com. You can also request a translated version by email.
User questions about BKSAR10 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Underfloor heating in PDF format for free! Find your manual BKSAR10 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BKSAR10 by HAGER.
USER MANUAL BKSAR10 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : BKSAR10
Category : Underfloor heating