FZ107N - Switch HAGER - Free user manual and instructions
Find the device manual for free FZ107N HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Hager |
| Model | FZ107N |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| Number of Poles | 1-pole |
| Number of Ways | 1-way (SPST) |
| Mounting Type | Flush-mounted |
| Material | Thermoplastic |
| Color | White |
| Dimensions (H x W x D) | 80 mm x 80 mm x 40 mm |
| Weight | 100 g |
| Degree of Protection | IP20 |
| Operating Temperature | -5°C to +40°C |
| Functions | On/off control of lighting circuits |
| Certifications | CE, RoHS |
| Installation | Fits standard 60 mm backbox |
| Terminal Capacity | Up to 2.5 mm² |
| Maintenance | Wipe with a dry cloth |
| Safety | Off-load switching, no exposed live parts when properly installed |
Frequently Asked Questions - FZ107N HAGER
How do I install the Hager FZ107N switch?
To install, first ensure the power is off. Connect the phase wire to the common terminal and the load wire to the switched terminal. Use screws to secure wires up to 2.5 mm². Mount the switch into a standard 60 mm backbox. Refer to the wiring diagram in the manual.
What tools are needed for installation?
You will need a flathead screwdriver for the terminals, a voltage tester to confirm power is off, and a spirit level for alignment.
Can the FZ107N be used outdoors?
No, this switch has an IP20 rating, meaning it is only suitable for indoor use in dry locations. For outdoor use, choose a switch with at least IP44.
Is the switch compatible with dimmers?
The FZ107N is a standard on/off switch and is not designed for dimming. Use a dedicated dimmer module if dimming is required.
What is the maximum load for this switch?
The maximum load is 10 A at 250 V AC, which corresponds to 2500 W for resistive loads. For inductive loads like motors, de-rate to 50%.
How do I wire the switch correctly?
Connect the line (phase) wire to the common terminal (marked L or C). Connect the load wire (to the light) to the other terminal. Ensure the earth wire is not connected to the switch. Tighten screws to 0.5 Nm.
Does the switch have an LED indicator?
No, the FZ107N does not include an LED indicator. It is a simple mechanical switch with a rocker action.
Is it suitable for LED lamps?
Yes, it is compatible with LED lamps, provided the total load does not exceed the 10 A rating. However, some LEDs may flicker if not properly wired; ensure a neutral wire is available.
What size are the screw terminals?
The terminals accept wires from 0.75 mm² to 2.5 mm². Use a screwdriver with a 3.5 mm flathead blade.
How should I clean the switch?
Wipe the surface with a soft, dry cloth. Do not use water or cleaning solvents, as they may damage the plastic.
User questions about FZ107N HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual FZ107N - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FZ107N by HAGER.