FR41E - Switch HAGER - Free user manual and instructions
Find the device manual for free FR41E HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Hager |
| Model | FR41E |
| Dimensions (H x W x D) | 86 mm x 86 mm x 31 mm |
| Weight | 0.1 kg |
| Mounting Type | Flush-mounting (EU standard) |
| Rated Current | 10 A |
| Rated Voltage | 250 V AC |
| Power Supply | None (passive device) |
| Switch Type | Single-pole, single-throw (SPST) |
| Main Functions | On/Off switching of lighting or other loads |
| Material | Polycarbonate (flame retardant) |
| Color | White (standard) |
| Operating Temperature | -5°C to +40°C |
| Protection Class | IP20 (indoor use only) |
| Certification | CE, NF |
| Maintenance and Cleaning | Wipe with a dry cloth; do not use abrasive cleaners |
| Safety Instructions | Install by a qualified electrician; disconnect power before installation |
| Spare Parts and Reparability | Not repairable, replace entire unit if defective |
| General Information | Designed for residential and commercial electrical installations |
Frequently Asked Questions - FR41E HAGER
What is the Hager FR41E switch used for?
The Hager FR41E is a standard single-pole switch used for controlling lighting or other electrical loads in residential or commercial buildings.
What are the dimensions of the FR41E?
The switch has typical dimensions of 86 mm x 86 mm x 31 mm, fitting standard EU wall boxes.
Can the FR41E be used for three-way switching?
No, the FR41E is a single-pole switch only. For three-way switching, you need compatible Hager intermediate switches.
How do I install the FR41E?
Installation must be done by a qualified electrician. Ensure power is off, connect live and switched live wires to the terminals, and fix the switch into a flush-mounting box.
Is the FR41E suitable for outdoor use?
No, the switch has IP20 protection, making it suitable only for indoor, dry locations.
What is the maximum load for the FR41E?
The switch is rated for 10 A at 250 V AC, which is typically sufficient for lighting circuits up to 2500 W.
Does the FR41E require a neutral wire?
No, as a simple mechanical switch, it only requires live and switched live wires; no neutral is needed.
Can the FR41E be used with dimmer bulbs?
The FR41E is a standard on/off switch. For dimming, you need a dedicated dimmer switch instead.
How do I clean the FR41E?
Wipe gently with a dry or slightly damp cloth. Do not use solvents or abrasive cleaners.
Where can I find the spare parts for FR41E?
The FR41E is not designed to be repaired; if defective, replace the entire unit. Contact Hager support for replacements.
User questions about FR41E HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual FR41E - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FR41E by HAGER.
USER MANUAL FR41E HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : FR41E
Category : Switch