DG4162 - Generator Rigol - Free user manual and instructions
Find the device manual for free DG4162 Rigol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual-Channel Function / Arbitrary Waveform Generator |
| Model | Rigol DG4162 |
| Channels | 2 |
| Maximum Frequency | 160 MHz (Sine), 80 MHz (Square/Pulse), 50 MHz (Ramp) |
| Sample Rate | 500 MSa/s |
| Vertical Resolution | 14 bits |
| Output Amplitude Range | 2 mVpp to 10 Vpp (into 50 Ω) |
| Arbitrary Waveform Length | Up to 16 Mpts per channel |
| Modulation Types | AM, FM, PM, FSK, PWM, Sweep, Burst |
| Display | 4.3-inch TFT LCD (480 x 272 pixels) |
| Connectivity | USB Host, USB Device, LAN (optional GPIB) |
| Dimensions (W x H x D) | 260 x 107 x 295 mm (10.2 x 4.2 x 11.6 in) |
| Weight | Approx. 3.0 kg (6.6 lb) |
| Power Supply | 100-240 VAC, 50/60 Hz, 50 W max |
| Main Functions | Sine, Square, Ramp, Pulse, Noise, DC, Arbitrary; modulation and sweep |
| Maintenance | Clean with soft dry cloth; avoid solvents; calibrate annually |
| Safety | Overvoltage protection, reverse polarity protection, ground bond |
| Spare Parts and Repairability | Fuses and power supply module available; contact Rigol service center |
| General Information | Supports SCPI commands, LAN/USB remote control, firmware upgrade via USB |
Frequently Asked Questions - DG4162 Rigol
What is the maximum frequency output of the Rigol DG4162?
The maximum frequency is 160 MHz for sine waves, 80 MHz for square/pulse, and 50 MHz for ramp waves.
How many channels does the DG4162 have?
It has two independent channels that can be used separately or combined.
Can the DG4162 generate arbitrary waveforms?
Yes, it supports arbitrary waveforms up to 16 Mpts per channel with 14-bit vertical resolution.
What modulation types are supported?
The generator supports AM, FM, PM, FSK, PWM, sweep, and burst modulation.
What is the output impedance?
The output impedance is 50 Ω for each channel.
How do I connect the DG4162 to a computer?
You can connect via USB (device/host) or LAN. The unit supports SCPI remote control commands.
What is the recommended calibration interval?
Rigol recommends annual calibration to maintain accuracy.
Can I synchronize the two channels?
Yes, you can set channels to track or couple for phase synchronization or combined outputs.
What is the maximum output amplitude?
The maximum amplitude is 10 Vpp into 50 Ω (open circuit up to 20 Vpp).
Does the DG4162 have a built-in frequency counter?
It does not have a dedicated counter, but it can measure frequency of external signals via the trigger input.
User questions about DG4162 Rigol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual DG4162 - Rigol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DG4162 by Rigol.
USER MANUAL DG4162 Rigol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rigol
Model : DG4162
Category : Generator