PowerEdge R760xs - Server DELL - Free user manual and instructions
Find the device manual for free PowerEdge R760xs DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Model | PowerEdge R760xs |
| Form Factor | 1U Rack |
| Dimensions (Height x Width x Depth) | 4.28 cm x 48.2 cm x 73.7 cm |
| Weight | Approx. 16.8 kg (maximum configuration) |
| Processor | Up to 2x Intel Xeon Scalable 4th Gen |
| Memory | Up to 2 TB DDR5 (16x 128 GB RDIMMs) |
| Storage Bays | Up to 10x 2.5" SAS/SATA/NVMe or 4x 3.5" SAS/SATA |
| Power Supply | Dual hot-plug 800W or 1400W AC/DC (redundant) |
| Cooling | Up to 6 hot-swappable fans with redundancy |
| RAID Support | Hardware RAID via PERC H755/H750 controller |
| Networking | Embedded 2x 10GbE SFP+ or 4x 1GbE (varies by configuration) |
| Management | iDRAC9 with Lifecycle Controller |
| Security Features | TPM 2.0, secure boot, chassis intrusion detection |
| Maintenance | Tool-less access to drives, fans, PSUs; optional Quick Sync bezel |
| Spare Parts & Repairability | Field-replaceable units (FRUs): PSU, fans, drives, risers, system board |
| Operating Systems | Windows Server, Red Hat, SUSE, VMware ESXi |
| Warranty | Standard 3-year hardware warranty (extendable) |
Frequently Asked Questions - PowerEdge R760xs DELL
How do I access the iDRAC management interface?
During boot, press F2 for System Setup, then select iDRAC Settings. Alternatively, use the dedicated management port and default IP 192.168.0.120 (set in BIOS). Login with root and the password set during initial configuration.
What RAID levels are supported by the PERC H755 controller?
The PERC H755 supports RAID levels 0, 1, 5, 6, 10, 50, 60. It also supports JBOD mode for non-RAID pass-through.
How to reset the system BIOS password?
Physically clear the CMOS by moving the jumper on the system board (labeled PSWD) to pins 2-3, then back to 1-2. Alternatively, remove the CMOS battery for 30 seconds. Consult the manual for exact jumper location.
Can I mix different memory speeds or sizes?
Mixing is allowed but all DIMMs will run at the lowest common speed. For optimal performance, use identical DIMMs from the same Dell qualified vendor list.
How to update firmware without an OS?
Use the Dell Lifecycle Controller (F10 during boot). Select Firmware Update, then choose a local drive or USB with the Dell Update Package (DUP) file. Ensure the file is compatible with your system.
What is the maximum storage capacity?
With 10x 2.5 drives, using 30TB SAS SSDs gives up to 300 TB raw. With 4x 3.5 drives, using 22TB HDDs gives up to 88 TB. Always check drive compatibility via Dell support.
How do I enable Secure Boot?
Enter System Setup (F2), go to System BIOS > Boot Settings, set Secure Boot to Enabled. Ensure the system is in UEFI boot mode. An OS with Secure Boot support is required.
What is the power consumption at idle?
Typical idle power with one CPU and minimal drives is around 120-150W. Full load with two CPUs and ten drives can reach 800W+, depending on configuration.
Can I install third-party PCIe cards?
Yes, the server has up to 3 PCIe 5.0 slots. Use riser cards for full-height, half-length cards. Dell recommends using Dell-qualified add-in cards for best compatibility.
How to monitor hardware health?
Use iDRAC9 web interface (or CLI via racadm) to view sensors, logs, and alerts. Integrate with Dell OpenManage Enterprise for fleet management. You can also use IPMI commands.
User questions about PowerEdge R760xs DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual PowerEdge R760xs - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerEdge R760xs by DELL.