DH-PFWB5-10n - Access Point Dahua Technology - Free user manual and instructions
Find the device manual for free DH-PFWB5-10n Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Dahua Technology |
| Model | DH-PFWB5-10n |
| Product Type | Access Point (Indoor/Outdoor) |
| Dimensions (Approx.) | 150 × 100 × 30 mm |
| Weight (Approx.) | 0.3 kg |
| Power Supply | PoE (802.3af) or 12V DC |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Antenna | 2× internal omnidirectional |
| Security | WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
| Interface | 1× 10/100/1000 Mbps Ethernet (PoE) |
| Mounting | Wall, ceiling, or pole (bracket included) |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Humidity | 5% – 95% (non-condensing) |
| LED Indicators | Power, LAN, WLAN |
| Management | Web GUI, SNMP, CLI |
| Compliance | FCC, CE |
| Maintenance | Clean with soft dry cloth; no liquids |
| Spare Parts | Not available; device not user-serviceable |
| Repairability | Professional repair only; contact Dahua support |
Frequently Asked Questions - DH-PFWB5-10n Dahua Technology
How do I reset the Dahua DH-PFWB5-10n to factory defaults?
Press and hold the reset button (located on the device) for about 10 seconds until the LEDs flash. The device will reboot with default settings.
What is the default IP address of the access point?
The default IP address is 192.168.1.1 or 192.168.1.200 depending on firmware. Check the sticker on the device.
Does the DH-PFWB5-10n support PoE?
Yes, it supports PoE 802.3af. Connect a PoE switch or injector to the Ethernet port.
How can I secure my wireless network?
Use WPA2-PSK encryption with a strong password. Access the web interface, go to Wireless Security, and enable WPA2.
What is the maximum number of clients supported?
Typically up to 30-50 simultaneous clients depending on usage and environment.
Can the access point be used outdoors?
Yes, it is designed for outdoor use. Ensure proper sealing of Ethernet connections and mounting in a sheltered location.
How do I access the web configuration interface?
Connect your computer to the same network, open a browser, enter the device's IP address (default 192.168.1.1), and log in with admin/admin.
What firmware version is required for this device?
Check the latest firmware on Dahua's official website. The device uses standard Dahua access point firmware.
Does it support multiple SSIDs?
Yes, it supports up to 8 SSIDs with separate VLAN and security settings.
How to mount the access point on a wall?
Use the included mounting bracket. Mark the screw holes, drill and insert anchors, then attach the bracket and slide the device onto it.
User questions about DH-PFWB5-10n Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual DH-PFWB5-10n - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DH-PFWB5-10n by Dahua Technology.
USER MANUAL DH-PFWB5-10n Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : DH-PFWB5-10n
Category : Access Point