RIO 3T131 A FE X - Dishwasher PRIVILEG - Free user manual and instructions
Find the device manual for free RIO 3T131 A FE X PRIVILEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Privileg |
| Model | RIO 3T131 A FE X |
| Energy Class | A |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 50 kg |
| Power Supply | 220-240 V ~ 50 Hz, 10 A |
| Total Power Consumption | 1900 W |
| Water Consumption (Eco program) | 12 L |
| Noise Level | 47 dB(A) |
| Number of Place Settings | 13 |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Glass, Pre-wash |
| Adjustable Racks | Yes, upper rack height adjustable |
| Cutlery Basket | Yes, removable 3-piece basket |
| Salt and Rinse Aid Indicator | Yes |
| Delay Start | 3-6-9 hours |
| Child Lock | Yes |
| Overflow Protection | Yes |
| Interior Material | Stainless steel |
| Control Panel | Electronic push buttons with LED display |
Frequently Asked Questions - RIO 3T131 A FE X PRIVILEG
How do I install my Privileg RIO 3T131 A FE X dishwasher?
Ensure the appliance is level and connected to a cold water supply (max 60°C) with a suitable pressure (0.04-1.0 MPa). Connect the drain hose to a siphon or sink drain. Electrical connection must be done by a qualified technician.
What detergent should I use?
Use a dishwasher detergent (powder, gel, or tablets). For better results, use a product with rinse aid and salt if you have hard water.
How do I clean the filter?
Remove the lower rack, then unscrew the filter assembly (cylinder and flat filter). Rinse under running water with a soft brush. Reassemble and lock. Clean once a month.
Why is my dishwasher not starting?
Check if the door is closed properly, the power cord is plugged in, and the circuit breaker is on. Ensure the water supply is open. If still not starting, try resetting by unplugging for 1 minute.
How do I adjust the upper rack height?
Pull the upper rack out halfway, press the side levers on both rails, and lift or lower the rack to the desired position. Ensure it clicks into place.
What does the E1 error code mean?
E1 indicates a water filling issue. Check that the water tap is open, the inlet hose is not kinked, and the filter in the inlet valve is clean. If problem persists, contact service.
How often should I add salt and rinse aid?
Add salt when the salt indicator light is on (usually after 20-30 cycles). Fill the rinse aid reservoir when the rinse aid indicator lights up, using a funnel to avoid spills.
Can I use the dishwasher when it is half full?
Yes, but select a half-load or economy program to save water and energy. Overloading may affect cleaning quality.
How do I remove stuck food particles from spray arms?
Remove the spray arms by unscrewing the top cap or pulling out the lower arm. Rinse with water and use a toothpick to clear blockages in the nozzles.
Where can I find spare parts?
Spare parts such as filters, spray arms, and racks are available from authorized Privileg service centers or online retailers. Check your user manual for part numbers.
User questions about RIO 3T131 A FE X PRIVILEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual RIO 3T131 A FE X - PRIVILEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RIO 3T131 A FE X by PRIVILEG.