UMC-12P - Compressor Unimac - Free user manual and instructions
Find the device manual for free UMC-12P Unimac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Unimac |
| Model | UMC-12P |
| Tank Capacity | 12 liters |
| Max Pressure | 8 bar (116 psi) |
| Air Flow | 150 L/min |
| Motor Power | 1.5 HP |
| Power Supply | 230 V / 50 Hz |
| Compressor Type | Piston |
| Dimensions (LxWxH) | 40 x 30 x 30 cm |
| Weight | 12 kg |
| Noise Level | 70 dB |
| Functions | Inflation, painting, pneumatic tools |
| Maintenance | Drain tank daily; check oil level |
| Safety Features | Pressure relief valve, thermal overload protection |
| Spare Parts Availability | Contact authorized service center |
| General Information | User manual included; suitable for home workshops |
Frequently Asked Questions - UMC-12P Unimac
How do I change the oil in the Unimac UMC-12P compressor?
Ensure the compressor is unplugged and cool. Locate the oil drain plug at the bottom, remove it, and drain old oil into a container. Replace the plug, then refill with SAE 30 non-detergent oil through the oil fill cap until it reaches the center of the sight glass. Do not overfill.
What is the maximum pressure of this compressor?
The Unimac UMC-12P has a maximum pressure of 8 bar (116 psi). The pressure switch automatically stops the motor when this pressure is reached.
Can I use this compressor for painting?
Yes, you can use it for painting with an appropriate spray gun. Ensure the air is clean and dry; you may need a water separator and pressure regulator for best results.
Why does my compressor not start?
Check the power supply, ensure the on/off switch is on, and verify the pressure switch is not stuck. If the motor hums but does not turn, it may be tripped due to thermal overload; let it cool down and press the reset button.
How often should I drain the tank?
Drain the water from the tank after each use or daily to prevent corrosion. Open the drain valve at the bottom of the tank until all moisture is expelled.
What type of oil does the UMC-12P use?
Use SAE 30 non-detergent compressor oil. Do not use automotive oil or detergent oils as they may damage the pump.
Is this compressor oil-free or oil-lubricated?
The Unimac UMC-12P is an oil-lubricated piston compressor. It requires regular oil level checks and changes as per the manual.
What is the recommended maintenance schedule?
Daily: drain tank. Weekly: check oil level, clean air filter. Monthly: inspect hoses and fittings. Annually: change oil and replace air filter. Refer to manual for details.
Can I use an extension cord with this compressor?
Yes, but use a heavy-duty cord of at least 14 AWG and no longer than 25 feet to avoid voltage drop. A longer or thinner cord can cause motor damage.
Where can I find spare parts for the UMC-12P?
Contact the Unimac authorized service center or your place of purchase. Common spare parts include pressure switches, valves, and air filters.
User questions about UMC-12P Unimac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual UMC-12P - Unimac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UMC-12P by Unimac.