ISO-23 MK2 - DJ Equipment Omnitronic - Free user manual and instructions
Find the device manual for free ISO-23 MK2 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Audio Isolator (3-channel) |
| Marque | Omnitronic |
| Modèle | ISO-23 MK2 |
| Catégorie | DJ Equipment |
| Dimensions (L x H x P) | 483 x 88 x 220 mm (19", 2U) |
| Poids | 2.5 kg |
| Alimentation | 230 V AC, 50 Hz (internal power supply) |
| Consommation électrique | 15 W |
| Nombre de canaux | 3 (stereo) |
| Connecteurs d'entrée | 3x RCA / 3x XLR (balanced) |
| Connecteurs de sortie | 3x RCA / 3x XLR (balanced) |
| Réponse en fréquence | 20 Hz - 20 kHz (±0.5 dB) |
| Rapport signal/bruit | > 90 dB |
| Distorsion harmonique totale | < 0.01% |
| Matériau du boîtier | Acier 1.5 mm, finition noire texturée |
| Format | Rack 19" (2U) |
| Indicateurs lumineux | LED par canal (signal et clipping) |
| Entretien et nettoyage | Essuyer avec un chiffon sec et doux ; ne pas utiliser de solvants |
| Sécurité | Mise à la terre via prise secteur ; ne pas exposer à l'humidité |
| Pièces détachées et réparabilité | Fusible interne remplaçable ; réparation par service agréé |
Frequently Asked Questions - ISO-23 MK2 Omnitronic
How do I connect the ISO-23 MK2 to my DJ mixer?
Use balanced XLR or unbalanced RCA cables. Connect the mixer's outputs to the corresponding inputs (channel 1, 2, or 3) on the ISO-23 MK2. Then connect the outputs to your amplifiers or speakers.
Can I use the ISO-23 MK2 to isolate a single channel?
Yes, each channel works independently. You can use the Ground Lift switch to eliminate hum loops. The Phase Reverse switch helps correct polarity issues.
What is the power supply requirement?
The device operates on 230 V AC, 50 Hz (standard European mains). It has an internal power supply – do not use an external adapter. Check the fuse rating (T 500 mA / 250 V) if it blows.
How do I mount the ISO-23 MK2 in a rack?
It fits a standard 19-inch rack (2U height). Use the supplied rack ears and screws. Ensure proper ventilation – do not block the cooling slots.
Why is there a humming noise in my audio?
Hum is often caused by ground loops. Engage the Ground Lift switch on the affected channel. Also check that all cables are properly shielded and connections are tight.
Can I connect unbalanced sources to the balanced inputs?
Yes, the XLR inputs accept balanced signals; for unbalanced, use RCA inputs. Mixing balanced and unbalanced on the same channel may cause signal loss – stick to one type per channel.
What is the purpose of the Phase Reverse switch?
The Phase Reverse switch inverts the polarity of the audio signal (180 degrees). This helps correct phase cancellation when using multiple sound sources or microphones.
How do I clean the ISO-23 MK2?
Disconnect power. Use a soft, dry cloth to wipe the front panel and case. Avoid liquid cleaners, abrasives, or solvents. Do not spray anything directly into the device.
What is the warranty for this product?
Omnitronic typically offers a 2-year warranty covering manufacturing defects. Keep your receipt and register the product online for extended service.
Can I repair the ISO-23 MK2 myself?
Only the fuse is user-replaceable. For internal repairs (power supply, circuit boards), contact an authorized service center to avoid damage or voiding warranty.
User questions about ISO-23 MK2 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual ISO-23 MK2 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ISO-23 MK2 by Omnitronic.
USER MANUAL ISO-23 MK2 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : ISO-23 MK2
Category : DJ Equipment