LED PLL-432 - Lamp Eurolite - Free user manual and instructions
Find the device manual for free LED PLL-432 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Model | LED PLL-432 |
| Brand | Eurolite |
| Light Source | 432 LEDs (RGB or multicolor) |
| Power Consumption | Approx. 180W |
| Input Voltage | 100-240V AC, 50/60Hz |
| Dimensions (L x W x H) | 290 x 230 x 230 mm |
| Weight | 2.8 kg |
| Control Protocols | DMX-512, Master/Slave, Sound Active |
| DMX Channels | 4, 6, or 8 channels |
| Operating Modes | Auto, Sound, DMX, Manual Color |
| Cooling | Passive (fanless) or low-noise fan |
| Housing Material | Aluminum and metal |
| Mounting | Floor stand or hanging via bracket |
| Beam Angle | 25 degrees (typical) |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Use in dry, ventilated area; keep away from flammable materials |
| Spare Parts | Fuse, optional LED module (replaceable) |
| Repairability | Replaceable fuse and LED module; service by qualified technician |
Frequently Asked Questions - LED PLL-432 Eurolite
How do I connect the LED PLL-432 to a DMX controller?
Use standard DMX cables (3-pin XLR). Connect the DMX output of the controller to the DMX input of the first fixture. Set the DMX address using the control panel. Refer to the manual for channel mapping.
What power supply does the Eurolite LED PLL-432 require?
It requires a mains power supply of 100-240V AC, 50/60Hz. Use the included power cord. Ensure the voltage matches your local supply.
Can I use this lamp in a wet environment?
No, the LED PLL-432 is designed for indoor dry use only. Exposure to moisture or rain can cause damage and void the warranty.
How do I clean the fixture?
Unplug the fixture before cleaning. Use a soft dry cloth to remove dust from the housing and lens. Do not use chemical cleaners or water.
What are the different operating modes?
The lamp supports Auto (built-in programs), Sound Active (responding to music), DMX (external control), and Manual Color (select specific colors via the display).
How many DMX channels does the LED PLL-432 use?
It can be set to 4, 6, or 8 channels depending on the mode. Check the manual for the exact channel functions for each mode.
Can I link multiple fixtures together?
Yes, use DMX cables to daisy-chain fixtures in master/slave mode. The master unit controls the slaves. Alternatively, control all via DMX with different addresses.
What is the beam angle of the LED PLL-432?
The typical beam angle is 25 degrees, suitable for stage lighting effects. For a wider wash, use a diffuser accessory if available.
How do I replace a blown fuse?
Disconnect power. Use a flathead screwdriver to open the fuse holder. Replace with a fuse of the same rating (usually 5x20mm, 1A). Do not use a higher amp fuse.
Is the LED module replaceable?
Yes, the LED module can be replaced by a qualified technician if it fails. Contact Eurolite support for spare parts and service.
User questions about LED PLL-432 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual LED PLL-432 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED PLL-432 by Eurolite.
USER MANUAL LED PLL-432 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED PLL-432
Category : Lamp