QND-6070RP - Surveillance Camera SAMSUNG - Free user manual and instructions
Find the device manual for free QND-6070RP SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Samsung |
| Model | QND-6070RP |
| Image Sensor | 1/2.8" CMOS |
| Resolution | 1920 x 1080 (2MP) |
| Lens | Fixed 2.8mm |
| Field of View (Horizontal) | 109° |
| IR Range | Up to 30m |
| Minimum Illumination | 0.005 Lux (0 Lux with IR) |
| Video Compression | H.265, H.264, MJPEG |
| Power Supply | Power over Ethernet (PoE) IEEE 802.3af |
| Dimensions (W x H x D) | 71.0 x 179.0 x 71.0 mm |
| Weight | 450 g |
| Protection Rating | IP66 |
| Operating Temperature | -10°C to 55°C |
| Storage | MicroSD card slot (max 256GB) |
| Network | Ethernet 10/100 Base-T |
| Security | IP address filtering, encryption, password protection |
| Installation | Wall mount bracket included |
| Maintenance | Clean lens with dry cloth |
| Spare Parts & Repairability | Contact Samsung support for service |
Frequently Asked Questions - QND-6070RP SAMSUNG
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with default settings.
How can I access the camera remotely?
Connect the camera to your network, find its IP address via the Samsung device finder tool, and log in via a web browser or the Samsung SmartViewer application.
How do I insert a MicroSD card?
Remove the camera housing, locate the MicroSD slot near the cable connection, and gently insert the card until it clicks. For continuous recording, format the card through the camera's web interface.
What is the default IP address?
The default IP address is typically 192.168.1.100. If unsure, use the Samsung IP installer tool to discover the camera on your network.
How do I enable motion detection?
Log in to the camera's web interface, go to Event > Motion Detection, enable it, and draw areas on the video. You can set sensitivity and send alerts via email or FTP.
How do I update the firmware?
Download the latest firmware from Samsung's support website. Log into the camera, go to Setup > System > Firmware, and upload the file. Do not power off during the update.
Can I power the camera with a standalone 12V DC supply instead of PoE?
Yes, the QND-6070RP supports 12V DC power input via a 2.1mm barrel jack. Use a regulated 12V power supply rated at least 1A. PoE is recommended for simpler installation.
How do I connect the camera to an NVR?
Connect the camera to the same network as the NVR (via PoE switch or router). The NVR should automatically discover the camera; if not, add it manually using the camera's IP address and admin credentials.
What is the warranty period?
Samsung typically offers a 2-year warranty for surveillance cameras. Check your region or contact Samsung support for exact terms.
How should I clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. For stubborn dirt, slightly dampen the cloth with water or a lens cleaning solution. Avoid abrasive materials.
User questions about QND-6070RP SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual QND-6070RP - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QND-6070RP by SAMSUNG.