MQ10FX - Mixer Proel - Free user manual and instructions
Find the device manual for free MQ10FX Proel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Mixer |
| Model | MQ10FX |
| Brand | Proel |
| Number of Channels | 10 (6 mono + 2 stereo) |
| Built-in Effects | Yes, 16-bit digital effects processor with 16 presets |
| Equalizer | 3-band EQ per channel (High, Mid, Low) |
| Phantom Power | +48V switchable |
| Inputs | XLR and 1/4" TRS combo jacks for mono channels, stereo channels with RCA and 1/4" |
| Outputs | Main L/R (XLR), Alt 3/4, Headphone, Control Room |
| USB Connectivity | USB audio interface for recording/playback |
| Dimensions (WxDxH) | Approx. 310 mm x 280 mm x 90 mm |
| Weight | Approx. 3.5 kg |
| Power Supply | External 12V DC adapter (included) |
| Power Consumption | 15 W typical |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | <0.05% |
| Signal-to-Noise Ratio | >90 dB |
| Maximum Input Level | +22 dBu |
| Headphone Output | 1/4" TRS, 40 mW @ 32 ohms |
| Operation Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | <80% (non-condensing) |
| Accessories Included | Power adapter, USB cable, user manual |
| Cleaning | Use a dry, soft cloth; avoid solvents or abrasives |
Frequently Asked Questions - MQ10FX Proel
How do I connect the MQ10FX to my computer?
Use the built-in USB audio interface. Connect a USB cable from the mixer to your computer. Select 'Proel MQ10FX' as your audio input/output in your DAW or system settings.
Can I use the mixer without external power?
No, the mixer requires the included 12V DC adapter. It does not run on batteries.
How do I apply the built-in effects?
Press the 'Effects' button on the desired channel. Use the 'Program' knob to select one of the 16 preset effects (e.g., reverb, delay). Adjust the effect send level with the 'FX' knob.
What is phantom power and when should I use it?
Phantom power (+48V) is used to power condenser microphones. Press the 'Phantom' button on the back panel. Use it only when condenser mics are connected; avoid with dynamic mics.
How do I record the main mix to my computer?
Connect the USB cable. The main stereo output is sent to your computer. Ensure the 'USB/ALT' button is set correctly to route the main mix to USB. You may need to select the appropriate sample rate in your DAW.
What do the 'ALT 3/4' outputs do?
These are auxiliary outputs that can be used for monitoring or sending to additional destinations. Assign channels to ALT 3/4 using the 'ALT 3/4' buttons above each channel fader.
How do I clean the mixer?
Unplug the mixer. Use a soft, dry cloth to gently wipe the surface. Do not use liquids, solvents, or abrasive cleaners. Avoid getting moisture into the faders or switches.
What should I do if no sound comes out?
Check that the mixer is powered on and the mains outlet is working. Ensure the master fader and channel faders are up. Verify that the mute buttons are not engaged. Check cables and connections. Try a different input.
Can I use the mixer with a guitar or keyboard?
Yes, connect guitars or keyboards to the 1/4" TRS inputs. For microphones, use XLR. Adjust the gain knob for optimal input level.
Where can I find replacement parts or service?
Contact Proel customer support or an authorized service center. Common parts like power adapters can be ordered through Proel's website or authorized dealers.
User questions about MQ10FX Proel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual MQ10FX - Proel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MQ10FX by Proel.
USER MANUAL MQ10FX Proel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Proel
Model : MQ10FX
Category : Mixer