Eurolite

LED Non Flex Controller PRO - Uncategorized Eurolite - Free user manual and instructions

Find the device manual for free LED Non Flex Controller PRO Eurolite in PDF.

📄 16 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Eurolite LED Non Flex Controller PRO - page 10
10 / 16
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Controller for Non-Flexible Strips
Model LED Non Flex Controller PRO
Brand Eurolite
Compatible LED Types Non-flexible (rigid) LED strips, single color or RGB
Control Method Infrared (IR) remote control
Number of Channels 4 (RGB + White) or 3 (RGB)
Output Current per Channel Up to 2A
Input Voltage 12-24V DC
Maximum Power Load 96W (at 24V)
Dimensions (approx.) 85 × 45 × 22 mm
Weight 50 g
Protection Rating IP20 (indoor use only)
Operating Temperature -20°C to 50°C
Warranty 2 years
Certifications CE, RoHS
Package Contents Controller, IR remote control, user manual

Frequently Asked Questions - LED Non Flex Controller PRO Eurolite

What types of LED strips are compatible with this controller?
This controller is designed for non-flexible (rigid) LED strips. It supports single color and RGB (up to 4 channels). Ensure your LED strip voltage matches the controller input (12-24V DC).
Can I use this controller with flexible LED strips?
No, this controller is specifically for non-flexible LED strips. Using it with flexible strips may cause improper connection or damage.
How do I connect the controller to my LED strip?
Connect the output terminals of the controller to the corresponding wires of your LED strip (V+, R, G, B, W). Ensure correct polarity and secure connections using provided connectors or soldering.
What is the maximum load this controller can handle?
The maximum output is 2A per channel, total 96W at 24V (or 48W at 12V). Exceeding these limits may cause overheating or failure.
The remote control is not working. What should I do?
Check if the remote has fresh batteries and is pointed directly at the receiver. Ensure there is no obstruction. If still not working, try resetting the controller by disconnecting power for 10 seconds.
Can I control multiple LED strips with one controller?
Yes, but the total current draw must not exceed 2A per channel. Use a relay or amplifier for higher loads.
Is this controller suitable for outdoor use?
No, it has an IP20 rating, meaning it is only suitable for indoor use in dry locations.
What should I do if the LED strip lights up but doesn't change colors?
Ensure the LED strip is RGB type and correctly wired. Press the color mode button on the remote. If still not working, the strip may be single color or the controller may be defective.
How do I clean the controller?
Disconnect power before cleaning. Use a dry, soft cloth to wipe the surface. Avoid solvents or water.
Where can I find a replacement remote control?
Contact Eurolite customer support or your point of purchase. The model number is typically printed on the remote.

User questions about LED Non Flex Controller PRO Eurolite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual LED Non Flex Controller PRO - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED Non Flex Controller PRO by Eurolite.

USER MANUAL LED Non Flex Controller PRO Eurolite

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eurolite

Model : LED Non Flex Controller PRO

Category : Uncategorized