Airblade HU03 - Hand dryers DYSON - Free user manual and instructions
Find the device manual for free Airblade HU03 DYSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hand Dryer |
| Brand | Dyson |
| Model | Airblade HU03 |
| Dimensions (H x W x D) | Approx. 600 mm x 300 mm x 200 mm |
| Weight | Approx. 8 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Power Consumption | 1600 W |
| Drying Time | Approx. 10 seconds |
| Airflow Speed | Up to 160 km/h |
| Motor Type | Digital motor |
| Filter | HEPA H13 filter |
| Noise Level | Approx. 85 dB(A) |
| Material | ABS plastic |
| Mount Type | Wall-mounted |
| Safety Features | Thermal cut-off, anti-theft screws |
| Maintenance | Clean HEPA filter every 3 months |
| Warranty | 5 years |
| Energy Efficiency | Up to 80% less energy than conventional dryers |
Frequently Asked Questions - Airblade HU03 DYSON
How often should I replace the HEPA filter in my Dyson Airblade HU03?
The HEPA filter should be replaced approximately every 6 months, or when the indicator light prompts. Regular replacement ensures optimal air quality and drying performance.
Can the Dyson Airblade HU03 be installed in a bathroom?
Yes, the unit is designed for commercial washrooms. It is IP rated for moisture resistance but should not be directly splashed. Ensure proper ventilation.
How do I clean the Dyson Airblade HU03?
Wipe the exterior with a damp cloth. Do not use abrasive cleaners. The HEPA filter can be vacuumed to remove dust. Refer to the manual for detailed cleaning steps.
Does the Dyson Airblade HU03 have a warranty?
Yes, Dyson offers a 5-year warranty on parts and labor for the Airblade HU03. Registration is required. See the warranty card for terms.
What is the drying time for the Dyson Airblade HU03?
The HU03 dries hands in approximately 10 seconds, using high-velocity air blades to scrape water off hands.
Is the Dyson Airblade HU03 energy efficient?
Yes, it uses up to 80% less energy than conventional hand dryers and produces up to 75% less CO2 compared to paper towels.
How loud is the Dyson Airblade HU03?
The noise level is approximately 85 dB(A), which is comparable to other commercial hand dryers. It is designed for use in high-traffic areas.
Can the Dyson Airblade HU03 be hardwired?
Yes, it requires a hardwired connection to a 220-240 V supply. A qualified electrician should perform installation in compliance with local regulations.
What is the airflow speed of the Dyson Airblade HU03?
The airflow speed reaches up to 160 km/h, created by the digital motor that drives air through narrow apertures.
How do I reset the filter indicator on the Dyson Airblade HU03?
After replacing the filter, press and hold the reset button (located inside the unit) for 5 seconds until the indicator light turns off.
User questions about Airblade HU03 DYSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hand dryers in PDF format for free! Find your manual Airblade HU03 - DYSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Airblade HU03 by DYSON.
