LED PAR-56 HCL - Projector Eurolite - Free user manual and instructions
Find the device manual for free LED PAR-56 HCL Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR-56 Projector |
| Brand | Eurolite |
| Model | LED PAR-56 HCL |
| LED Type | High-CRI RGBW LED |
| Number of LEDs | 1 |
| Power Consumption | 36 W |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| DMX Channels | 6 or 8 (selectable) |
| Beam Angle | 25° |
| Housing Material | Aluminum |
| Color | Black |
| Dimensions (L x W x H) | 260 x 260 x 350 mm |
| Weight | 2.5 kg |
| Cooling | Passive convection |
| Protection Rating | IP20 |
| Operating Temperature | 0°C to 40°C |
| Control Modes | DMX512, Master/Slave, Standalone |
| Functions | RGBW color mixing, strobe, dimmer |
| Safety Features | PTC fuse, overheating protection |
| Cleaning Instructions | Use dry cloth; avoid liquids |
| Spare Parts Available | LED module, power supply, fuse |
| Maintenance | Check ventilation grills regularly |
| Certifications | CE, RoHS |
Frequently Asked Questions - LED PAR-56 HCL Eurolite
How do I connect the LED PAR-56 HCL to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input of the fixture to the DMX output of your controller. Set the desired DMX address via the display menu. Make sure to terminate the last fixture with a DMX terminator.
Can I use this projector outdoors?
No, the IP20 rating means it is only suitable for indoor use. Protect it from moisture and dust.
How do I clean the lens and housing?
Disconnect the fixture from power. Use a soft, dry cloth to gently wipe the lens and housing. Do not use cleaning agents or liquids as they may damage the device.
What is the expected lifespan of the LED?
The RGBW LED is rated for approximately 50,000 hours. Actual lifespan may vary depending on operating conditions and cooling.
Why is the fan not turning on?
This fixture uses passive convection cooling and does not have a fan. Ensure that ventilation slots are not blocked to avoid overheating.
How do I reset the fixture to factory settings?
Go to the menu and select 'Factory Reset' or hold the MODE button for 10 seconds. Confirm the reset when prompted.
Can I replace the LED module myself?
Replacement of the LED module should be performed by qualified personnel only. Contact Eurolite support or a certified technician for spare parts and service.
What is the maximum number of fixtures I can daisy-chain on one DMX line?
You can daisy-chain up to 32 fixtures on a single DMX line if using good quality cables. For longer runs, use a DMX booster or splitter.
Does the projector support RDM (Remote Device Management)?
No, this model does not support RDM. DMX addressing must be set manually on each fixture.
What does the 'HCL' in the model name stand for?
HCL stands for High Color Rendering LEDs, which provide better color accuracy and natural light compared to standard LEDs.
User questions about LED PAR-56 HCL Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual LED PAR-56 HCL - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED PAR-56 HCL by Eurolite.