WWK 221 electronic - Boiler STIEBEL ELTRON - Free user manual and instructions
Find the device manual for free WWK 221 electronic STIEBEL ELTRON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat pump water heater |
| Model | WWK 221 electronic |
| Brand | Stiebel Eltron |
| Tank Capacity | 221 liters |
| Dimensions (H x D) | Approx. 1310 x 610 mm |
| Weight | Approx. 90 kg |
| Power Supply | 230 V AC, 50 Hz |
| Heating Capacity | 2.2 kW (heat pump) / 2.0 kW (electric backup) |
| Energy Efficiency Class | A+ |
| Max Water Temperature | 60 °C |
| Refrigerant | R134a, 1.0 kg |
| Control | Electronic with LCD display |
| Modes | Eco, Boost, Away, Manual |
| Installation | Indoor, floor-standing |
| Connection | G 1 inch cold water inlet / hot water outlet |
| Maintenance | Annual inspection of anode and refrigerant circuit |
| Cleaning | Wipe with damp cloth; do not use abrasive cleaners |
| Safety Features | Overheat protection, pressure relief valve, frost protection |
| Spare Parts Availability | Authorized service centers; easy to replace components |
| Warranty | 2 years (manufacturer warranty) |
Frequently Asked Questions - WWK 221 electronic STIEBEL ELTRON
How do I reset the WWK 221 electronic boiler?
To reset, press and hold the reset button on the control panel for 3 seconds. If the issue persists, turn off the power for 10 minutes and restart.
What does the error code E2 mean?
Error code E2 indicates a sensor fault. Check the temperature sensor connections and contact service if needed.
How often should I clean the air filter?
Clean the air filter every 3 months by rinsing with water and drying thoroughly before reinserting.
Can I use the boiler without mains water pressure?
No, the boiler requires a minimum water pressure of 0.2 MPa (2 bar) to operate correctly.
What is the recommended temperature for optimal efficiency?
Set the temperature to 50 °C for a balance between efficiency and hot water comfort. Higher temperatures increase energy use.
How do I drain the water heater?
Turn off power, close the cold water inlet, attach a hose to the drain valve, and open the valve. Open a hot water tap to allow air in.
Is the boiler suitable for outdoor installation?
No, the WWK 221 electronic is designed for indoor installation only in a frost-free room.
What refrigerant is used?
The system uses R134a refrigerant. Service must be done by certified technicians.
How can I reduce noise from the heat pump?
Ensure the boiler is on a solid level surface and not in contact with walls. Clean the fan and check for loose parts.
Where can I find spare parts?
Spare parts are available through Stiebel Eltron authorized service centers. Provide the model number and serial number.
User questions about WWK 221 electronic STIEBEL ELTRON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual WWK 221 electronic - STIEBEL ELTRON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WWK 221 electronic by STIEBEL ELTRON.