BM525s - Multimeter Brymen - Free user manual and instructions
Find the device manual for free BM525s Brymen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Brymen |
| Model | BM525s |
| Display | 6000 counts, backlit LCD |
| DC Voltage | 600mV to 1000V, ±0.5% |
| AC Voltage | 600mV to 1000V, True RMS |
| DC Current | 600µA to 10A |
| AC Current | 600µA to 10A, True RMS |
| Resistance | 600Ω to 60MΩ |
| Capacitance | 60nF to 60mF |
| Frequency | 10Hz to 60MHz |
| Temperature | -20°C to 1000°C (with thermocouple) |
| Diode Test | Yes |
| Continuity Test | Audible beep < 30Ω |
| Safety Rating | CAT III 1000V, CAT IV 600V |
| Power Source | 9V battery (NEDA 1604A) |
| Dimensions | 190 x 90 x 50 mm |
| Weight | Approx. 400 g (with battery) |
| Accessories Included | Test leads, thermocouple, battery, manual |
| Warranty | 3 years |
Frequently Asked Questions - BM525s Brymen
How do I measure DC voltage with the BM525s?
Set the rotary dial to V⎓ (DC voltage). Insert the black lead into COM and red lead into VΩ. Connect probes to the circuit. Read the voltage on the display. Ensure the circuit is de-energized before connecting.
How do I measure AC current?
Turn the dial to A~ (AC current). Insert black lead into COM and red lead into 10A (for high current) or mAµA (for low current). Break the circuit and connect the meter in series. Read the current. Do not exceed 10A for more than 30 seconds.
What does the continuity test do?
The continuity test checks if a circuit is complete. Set dial to ))). Insert black lead into COM, red into VΩ. Touch probes together: a beep indicates continuity. Use to check fuses, wires, and connections.
How do I replace the battery?
Turn off the meter and remove the test leads. Unscrew the battery cover on the back. Replace the 9V battery (NEDA 1604A) observing polarity. Replace the cover and screws. Dispose of old battery properly.
What safety precautions should I follow?
Always use the correct input jacks and range. Do not exceed the rated voltage (CAT III 1000V, CAT IV 600V). Inspect test leads for damage. Use personal protective equipment. Do not use in damp conditions.
Does the BM525s measure temperature?
Yes, with an optional thermocouple (type K). Set dial to °C/°F. Insert thermocouple into the COM and VΩ jacks (polarity matters). Touch the probe to the object. Read temperature on display.
How do I measure capacitance?
Set dial to F (capacitance). Insert black lead into COM, red lead into VΩ. Discharge the capacitor fully. Connect leads to capacitor terminals. Wait for a stable reading. Range is 60nF to 60mF.
What does the hold button do?
The HOLD button freezes the current reading on the display. Press it once to hold the value, press again to release. Useful for taking measurements in hard-to-reach places.
How do I use the relative measurement mode?
Press REL button to zero out test lead resistance or offset. Connect probes together (for resistance) or measure reference. The display shows the difference from the reference.
What is the maximum input voltage?
For voltage measurements: 1000V DC or 1000V AC RMS. For current: 10A (30 seconds max). The meter is rated for CAT III 1000V and CAT IV 600V. Exceeding limits may damage the meter or cause injury.
User questions about BM525s Brymen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual BM525s - Brymen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BM525s by Brymen.