BM27s - Multimeter Brymen - Free user manual and instructions
Find the device manual for free BM27s Brymen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Brymen |
| Model | BM27s |
| Type | Digital Multimeter |
| Dimensions (approx.) | 150 x 70 x 30 mm |
| Weight (approx.) | 200 g (including battery) |
| Power Supply | 9V battery (PP3/6F22) |
| Display | 2000 counts LCD |
| DC Voltage Range | 200 mV to 600 V |
| AC Voltage Range | 200 V to 600 V |
| DC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 2 MΩ |
| Capacitance Measurement | 2 nF to 200 µF |
| Frequency Measurement | Up to 200 kHz |
| Continuity Test | Yes (audible beep) |
| Diode Test | Yes |
| Safety Rating | CAT II 600 V |
| Overload Protection | Yes (on all ranges) |
| Low Battery Indication | Yes |
| Auto Power Off | Yes (after approx. 15 minutes) |
| Accessories Included | Test leads, 9V battery, user manual |
| Reparability | User-replaceable battery and fuse; professional repair for other issues |
| Cleaning | Wipe with a damp cloth; do not use solvents |
| Storage Temperature | -10°C to 60°C (battery removed) |
| Operating Temperature | 0°C to 40°C |
Frequently Asked Questions - BM27s Brymen
How do I replace the battery in my Brymen BM27s?
Turn off the multimeter and remove the test leads. Unscrew the back cover, replace the 9V battery with a new one (PP3 type), then reattach the cover.
What is the maximum voltage the BM27s can measure?
The BM27s can measure up to 600 V in both DC and AC modes. However, it is rated for Category II (CAT II) environments only.
How do I test continuity with the BM27s?
Set the rotary switch to the continuity/diode mode. Touch the test leads together; you should hear a beep if the circuit is closed. Open circuits will not beep.
Can I measure capacitance with the BM27s?
Yes, the BM27s has a capacitance measurement function up to 200 µF. Ensure the capacitor is discharged before testing.
What should I do if the multimeter displays '1' or 'OL'?
'OL' means overload: the measured value exceeds the selected range. Switch to a higher range or adjust the setting.
How do I clean the BM27s multimeter?
Use a damp cloth with mild detergent to wipe the exterior. Do not use solvents or immerse the device in water.
Why does my multimeter auto power off?
The BM27s has an auto power-off feature to save battery. It turns off after approximately 15 minutes of inactivity. You can press any button to wake it.
What is the accuracy of the BM27s for DC voltage?
For DC voltage, the accuracy is typically ±(0.8% reading + 2 digits). Check the user manual for specific ranges.
Can I measure AC current with the BM27s?
Yes, the BM27s can measure AC current up to 10 A (limited to 10 seconds for high currents). Use the appropriate input jack.
Where can I find the user manual for the BM27s?
The user manual can be downloaded for free from notice-facile.com in PDF format. Search for 'Brymen BM27s manual'.
User questions about BM27s Brymen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual BM27s - Brymen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BM27s by Brymen.
USER MANUAL BM27s Brymen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brymen
Model : BM27s
Category : Multimeter