GS1200-5HP v2 - Switch ZYXEL - Free user manual and instructions
Find the device manual for free GS1200-5HP v2 ZYXEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smart Managed Gigabit Ethernet Switch |
| Model Number | GS1200-5HP v2 |
| Ports | 5 x 10/100/1000 Mbps (Gigabit) Ethernet |
| PoE Ports | 4 ports (802.3af/at PoE+), up to 30W per port |
| Total PoE Budget | 60W |
| Switching Capacity | 10 Gbps |
| MAC Address Table | 2K entries |
| Management | Web-based GUI, VLAN, QoS, IGMP snooping |
| Dimensions (W x D x H) | 250 x 105 x 27 mm (9.8 x 4.1 x 1.1 inches) |
| Weight | 0.7 kg (1.5 lbs) |
| Power Supply | External AC adapter (input: 100-240V, output: 53V DC, 1.25A) |
| Power Consumption | Max 70W (with full PoE load) |
| Cooling | Fanless, silent operation |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Housing Material | Metal |
| Mounting | Desktop, wall-mountable (brackets included) |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3af/at |
| Warranty | 2 years limited |
Frequently Asked Questions - GS1200-5HP v2 ZYXEL
How do I access the web interface of the GS1200-5HP v2?
By default, the switch uses IP address 192.168.1.1. Set your computer to a static IP in the same subnet (e.g., 192.168.1.100), connect an Ethernet cable to any port, and open a browser to that address. Default username is admin and password is 1234.
Can this switch be used without any configuration?
Yes, it works as an unmanaged switch out of the box. All ports are auto-negotiating and plug-and-play. Advanced features like VLAN require web management.
How much PoE power can each port deliver?
Each PoE port supports IEEE 802.3af/at and can deliver up to 30W per port. The total PoE budget is 60W, so the maximum simultaneous power is limited.
Does the switch support VLAN configuration?
Yes, it supports 802.1Q VLAN with up to 64 VLAN groups. You can create port-based and tagged VLANs through the web interface.
What is the maximum cable length for this switch?
Standard Ethernet cable length is up to 100 meters (328 feet) for Gigabit speeds. For PoE, the same distance applies but may be limited by power loss.
How do I reset the switch to factory defaults?
Press and hold the Reset button (located on the front panel) with a paperclip for about 10 seconds until the LEDs flash. All settings will be restored to defaults.
Can I connect this switch to an existing network?
Absolutely. Connect any port to your router or another switch using a standard Ethernet cable. The switch will automatically learn and forward traffic.
Is the switch rackmountable?
No, it is designed for desktop or wall-mounting with the included brackets. It does not come with rackmount ears.
How can I update the firmware?
Download the latest firmware from Zyxel's support website. Then log into the web interface, go to Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What do the LED indicators mean?
Each port has two LEDs: Link/Act (solid green for link, blinking for activity) and PoE (amber when powered). The Power LED (green) indicates the switch is on.
User questions about GS1200-5HP v2 ZYXEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS1200-5HP v2 - ZYXEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS1200-5HP v2 by ZYXEL.
USER MANUAL GS1200-5HP v2 ZYXEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZYXEL
Model : GS1200-5HP v2
Category : Switch