FELIX 2 - Receiver Grace Design - Free user manual and instructions
Find the device manual for free FELIX 2 Grace Design in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Phono Preamplifier / Receiver |
| Brand | Grace Design |
| Model | FELIX 2 |
| Inputs | 2 x RCA (phono), 1 x XLR (phono) |
| Outputs | 1 x RCA (line), 1 x XLR (line) |
| Gain | 40, 50, 60 dB (selectable) |
| Loading Options | Resistive: 10, 50, 100, 200, 500, 1k, 10k, 47k ohms; Capacitive: 0, 100, 200, 470, 1000 pF |
| Subsonic Filter | Yes, switchable (20 Hz, 12 dB/oct) |
| Mono Switch | Yes, left + right summed |
| Polarity Inversion | Yes, switchable per input |
| Frequency Response | RIAA ±0.1 dB (20 Hz - 20 kHz) |
| Signal-to-Noise Ratio | > 90 dB (A-weighted, 40 dB gain) |
| Dimensions (W x D x H) | 216 x 165 x 44 mm (8.5 x 6.5 x 1.7 in) |
| Weight | 1.1 kg (2.4 lbs) |
| Power Supply | External 24V DC 1A power adapter |
| Power Consumption | < 5 W |
| Chassis Material | Aluminum and steel |
| Care and Cleaning | Wipe with a dry, soft cloth. Do not use solvents or abrasive cleaners. |
| Safety | Use only supplied power adapter. Keep away from moisture and heat sources. |
| Spare Parts and Repairability | Contact Grace Design or authorized service center for replacement parts. Unit is not user-serviceable. |
| General Information | Designed for high-end vinyl playback. Suitable for moving magnet and moving coil cartridges. |
Frequently Asked Questions - FELIX 2 Grace Design
What types of cartridges are compatible with the FELIX 2?
The FELIX 2 supports both moving magnet (MM) and moving coil (MC) cartridges. The gain can be adjusted (40, 50, 60 dB) to match the cartridge output.
How do I set the correct loading for my cartridge?
Refer to your cartridge's specifications. Use the dip switches on the rear panel to select resistive loading (10 to 47k ohms) and capacitive loading (0 to 1000 pF). Start with the manufacturer's recommended values.
What is the subsonic filter used for?
The subsonic filter (20 Hz, 12 dB/octave) removes low-frequency rumble from turntables or warped records, preventing woofer excursion and amplifier strain.
Can I connect both an RCA and XLR turntable?
Yes, the FELIX 2 has two RCA inputs and one XLR input. You can switch between them using the front panel selector.
How do I use the mono switch?
The mono switch sums the left and right channels to mono. Use it when playing mono records or to diagnose channel balance issues.
What is the purpose of the polarity inversion switch?
The polarity inversion switch reverses the absolute phase of the signal. Some recordings or cartridges may benefit from this for improved imaging.
Does the FELIX 2 have a power switch?
Yes, there is a power switch on the front panel. The unit also automatically enters standby mode after 20 minutes of no signal.
The unit does not power on. What should I check?
First, ensure the power adapter is securely connected to the FELIX 2 and the wall outlet. Check if the adapter's LED is lit. If not, try a different outlet. If still no power, contact support.
Can I use the FELIX 2 with a powered speaker?
Yes, the FELIX 2 outputs line-level signal (RCA or XLR) suitable for powered speakers or an amplifier. The gain should be set appropriately to avoid distortion.
How often should I clean the FELIX 2?
Clean the chassis and front panel with a dry, soft cloth as needed. Avoid liquids. No internal cleaning is required. The unit does not need periodic maintenance.
User questions about FELIX 2 Grace Design
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual FELIX 2 - Grace Design and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FELIX 2 by Grace Design.