HIC 3B19 C UK - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HIC 3B19 C UK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Hotpoint |
| Model | HIC 3B19 C UK |
| Installation Type | Built-under / Integrated |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Net Weight | 45 kg |
| Energy Efficiency Class | E (Estimated) |
| Annual Energy Consumption | 225 kWh (estimated) |
| Water Consumption per Cycle | 12 L |
| Place Settings | 13 |
| Number of Programs | 6 (Eco, Intensive, Normal, Quick, Soak, Glass) |
| Noise Level | 44 dB(A) |
| Drying System | Condensation drying |
| Water Protection System | Total water stop |
| Child Lock | Yes |
| Adjustable Racks | Upper rack height adjustable |
| Cutlery Basket | Yes, removable |
| Salt and Rinse Aid Indicator | Yes, on control panel |
| Delay Start | Up to 24 hours |
| Continuous Operation Indicator | No |
| Control Type | Electronic push buttons |
Frequently Asked Questions - HIC 3B19 C UK HOTPOINT
How do I install the Hotpoint HIC 3B19 C UK dishwasher?
Ensure the dishwasher is level and connected to water and electricity. Follow the installation guide in the manual. Use the supplied fittings and check that the drain hose is properly secured.
How can I reset the dishwasher?
To reset, turn off the appliance at the wall socket, wait 10 seconds, then turn it back on. Alternatively, hold the Start/Reset button for 3 seconds during a cycle.
What do error codes F1, F2, etc. mean?
Error codes indicate specific faults. For example, F1 usually signals a water inlet issue, F2 a drain problem. Refer to the manual for a full list of error codes and troubleshooting steps.
How do I clean the filters?
Remove the lower rack, unscrew the filter unit, and rinse it under running water. Use a soft brush to remove debris. Reassemble properly. Clean monthly for best performance.
What is the best way to load the dishwasher?
Place plates facing the spray arms, bowls tilted down, and cutlery with handles down. Ensure nothing blocks the spray arm rotation. Heavy soiled items on the bottom rack, delicate on top.
How can I save energy using this dishwasher?
Use the Eco cycle for normally soiled dishes, run full loads, and select air dry if available. Also, scrape food off but do not pre-rinse to save water and energy.
When should I add salt and rinse aid?
Fill the salt reservoir when the salt indicator light is on. Add rinse aid to the dispenser until the indicator shows full. Adjust the rinse aid setting if spots appear.
Can I use regular dish soap instead of dishwasher detergent?
No, only use specific dishwasher detergent. Regular dish soap creates excessive suds and can damage the machine, causing leaks and poor cleaning.
How do I select the right cycle for different loads?
Choose Intensive for heavy soiled pots, Eco for normal, Quick for lightly soiled, Glass for delicate items, and Soak for pre-rinsing. Refer to the cycle chart in the manual.
What maintenance does the dishwasher require?
Clean filters monthly, wipe door gaskets, run a cleaning cycle with a dishwasher cleaner annually. Also, check spray arms for blockages and replace parts as needed.
User questions about HIC 3B19 C UK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HIC 3B19 C UK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HIC 3B19 C UK by HOTPOINT.
USER MANUAL HIC 3B19 C UK HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : HIC 3B19 C UK
Category : Dishwasher