2WDP064 - Doorbell Mercury - Free user manual and instructions
Find the device manual for free 2WDP064 Mercury in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Doorbell |
| Brand | Mercury |
| Model | 2WDP064 |
| Dimensions (Transmitter) | 80 x 40 x 25 mm |
| Dimensions (Receiver) | 100 x 60 x 30 mm |
| Weight (Total) | 150 g |
| Power Supply | 2 x AAA batteries (transmitter), 2 x AA batteries (receiver) |
| Transmission Range | Up to 100 m (open field) |
| Chime Sounds | 36 selectable melodies with volume control |
| LED Indicator | Flashing when button pressed |
| Installation | Adhesive tape or screws included |
| Weather Resistance | IP44 rating for transmitter |
| Maintenance | Clean with dry cloth; replace batteries as needed |
| Safety | For indoor/outdoor use; keep away from excessive moisture |
| Spare Parts | Batteries are user-replaceable; no other spare parts available |
| Warranty | 1 year manufacturer warranty |
Frequently Asked Questions - 2WDP064 Mercury
How do I set up the Mercury 2WDP064 doorbell?
Install AAA batteries in the transmitter (doorbell button) and AA batteries in the receiver (chime unit). Mount the transmitter using adhesive tape or screws at your door, and plug the receiver into a wall socket. Press the button to test.
What type of batteries does the doorbell need?
The transmitter requires 2 x AAA batteries, and the receiver requires 2 x AA batteries (both not included). Use alkaline batteries for best performance.
Can I change the chime sound?
Yes, the receiver has a button to cycle through 36 different melodies. Press and hold to adjust volume as well.
What is the maximum range of the doorbell?
The operating range is up to 100 meters in open space. Walls and obstacles may reduce the effective range.
Is the doorbell waterproof?
The transmitter (button) has an IP44 rating, meaning it is splash-proof and suitable for outdoor use. The receiver should be kept indoors.
The doorbell is not ringing. What should I check?
First, check that batteries are correctly installed and have sufficient charge. Ensure the receiver is plugged in and turned on. Verify that the transmitter is within range. If still not working, try re-pairing the units.
How do I pair the transmitter and receiver?
The units come pre-paired. If you need to re-pair, press the pairing button on the receiver (usually located on the side) and then press the doorbell button within 10 seconds. A confirmation tone will sound.
Can I add additional transmitters?
Yes, the receiver can support multiple transmitters. Simply pair each additional transmitter following the same pairing procedure.
Does the doorbell work in low temperatures?
The doorbell is designed for typical outdoor conditions. Extreme cold may reduce battery life but operation is generally reliable between -10°C and 50°C.
How do I clean and maintain the doorbell?
Use a soft, dry cloth to wipe the transmitter and receiver. Avoid water or cleaning solvents. Check and replace batteries annually or when performance degrades.
User questions about 2WDP064 Mercury
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Doorbell in PDF format for free! Find your manual 2WDP064 - Mercury and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2WDP064 by Mercury.
USER MANUAL 2WDP064 Mercury
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mercury
Model : 2WDP064
Category : Doorbell