MTM01 - Multimeter Mercury - Free user manual and instructions
Find the device manual for free MTM01 Mercury in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Model | MTM01 |
| Brand | Mercury |
| Display Type | LCD, 2000 counts |
| DC Voltage Range | 200mV to 600V |
| AC Voltage Range | 200mV to 600V |
| DC Current Range | 200µA to 10A |
| Resistance Range | 200Ω to 2000kΩ |
| Diode Test | Yes |
| Continuity Test | Yes (audible buzzer) |
| Transistor Test | No |
| Capacitance Measurement | No |
| Frequency Measurement | No |
| Temperature Measurement | No |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Power Off | Yes (after 30 minutes) |
| Power Source | 9V battery (6LR61 or equivalent) |
| Dimensions (L x W x H) | Approx. 145 x 75 x 35 mm |
| Weight | Approx. 200 g (including battery) |
| Safety Rating | CAT II 600V, CAT I 1000V |
| Overload Protection | Yes |
| Fuse Protection | 10A/250V fuse for current ranges |
| Accessories Included | Test leads, battery, manual |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Humidity | <75% RH |
Frequently Asked Questions - MTM01 Mercury
How do I measure DC voltage with the MTM01?
Turn the dial to the DCV position, select the appropriate range (if manual), connect the black test lead to COM and red to VΩmA, then probe the circuit.
What does the continuity test sound like?
When the resistance is less than about 30Ω, a continuous beep sounds to indicate a closed circuit.
How do I replace the battery?
Remove the screw on the back cover, lift the battery compartment and replace the 9V battery (6LR61). Reattach cover.
Can I measure AC current with this multimeter?
Yes, set the dial to ACA (or DCA for DC) and use the 10A or mA jack as needed. Note that AC current measurement is typically for frequencies up to 400Hz.
What is the maximum voltage I can measure?
The MTM01 can measure up to 600V DC or AC. Do not exceed this to avoid damage or injury.
How do I use the diode test?
Turn the dial to the diode symbol. Connect red lead to anode, black to cathode. The display shows the forward voltage drop (typically 0.5-0.8V for silicon).
Why does my multimeter show 'OL'?
OL stands for Over Load or open loop. It indicates the measurement exceeds the range or the circuit is open (no continuity).
Can I measure capacitance with this model?
No, the MTM01 does not have a capacitance measurement function. You would need a dedicated LCR meter or a more advanced multimeter.
How do I clean the multimeter?
Use a soft dry cloth to clean the case. Do not use solvents or water. Ensure no liquid enters the interior.
What safety precautions should I take?
Always use the correct input jacks and range. Do not measure voltage above 600V. Use personal protective equipment when working with live circuits. Disconnect leads when not in use.
User questions about MTM01 Mercury
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual MTM01 - Mercury and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTM01 by Mercury.
USER MANUAL MTM01 Mercury
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mercury
Model : MTM01
Category : Multimeter