Controller RC700 - Uncategorized EPSON - Free user manual and instructions
Find the device manual for free Controller RC700 EPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Robot Controller |
| Brand | Epson |
| Model | RC700 |
| Dimensions (W x D x H) | Approximately 400 x 350 x 150 mm |
| Weight | Approximately 10 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 500 W max |
| Main Functions | Motion control, programming, I/O control, communication interface |
| Supported Robots | Epson SCARA and 6-axis robots |
| Control Axes | Up to 6 axes |
| Programming Language | Epson RC+ (SPEL+) |
| Communication Ports | Ethernet, RS-232, USB, I/O |
| Safety Features | Emergency stop, safety relay, enabling switch |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 60 °C |
| Humidity | 20% to 80% (non-condensing) |
| Maintenance | Regular cleaning, battery replacement every 5 years |
| Spare Parts | Backup battery, power supply unit, fuse |
| Certifications | CE, UL |
| Warranty | 2 years (standard) |
Frequently Asked Questions - Controller RC700 EPSON
How do I connect the RC700 controller to the robot?
Use the provided motor power cable and encoder cable to connect the controller to the robot. Ensure all connectors are securely latched. Refer to the wiring diagram in the manual.
What programming software is used for the RC700?
The RC700 is programmed using Epson RC+ software, which supports the SPEL+ language. Install RC+ on a Windows PC and connect via Ethernet or USB.
How can I perform an emergency stop?
Press the red emergency stop button on the controller front panel. It will immediately cut power to the robot. Twist to release after the hazard is cleared.
What should I do if the controller does not power on?
Check the power cable connection, ensure the main power switch is on, and verify the input voltage meets specifications (AC 100-240 V). If the issue persists, inspect the fuse or contact support.
Can I control the RC700 over a network?
Yes, the RC700 has an Ethernet port for remote monitoring and control. Configure the IP settings in RC+ and use standard TCP/IP protocols.
How often should I replace the backup battery?
Replace the backup battery every 5 years to retain memory settings. Use an Epson-approved lithium battery. Refer to the maintenance section for procedure.
The robot moves erratically, what could be wrong?
Check for loose encoder cables, ensure the motor brakes are released, and verify the program logic. Also inspect for mechanical binding or payload overload.
What languages does the RC700 support?
The RC700 supports multiple languages including English, Japanese, Chinese, and German. Set the language in RC+ under Project Properties.
How do I clear an alarm on the controller?
Identify the error code from the LED display. Consult the error code list in the manual. To clear, resolve the root cause and press the reset button or cycle power if necessary.
Is it possible to upgrade the firmware?
Yes, download the latest firmware from Epson's support website. Use the Firmware Update Tool in RC+ via a USB or Ethernet connection. Follow the instructions carefully.
User questions about Controller RC700 EPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Controller RC700 - EPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Controller RC700 by EPSON.
USER MANUAL Controller RC700 EPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EPSON
Model : Controller RC700
Category : Uncategorized