RC620+ - Controller EPSON - Free user manual and instructions
Find the device manual for free RC620+ EPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Roll Media Feeder/Cutter |
| Brand | Epson |
| Model | RC620+ |
| Dimensions (W x D x H) | Approx. 650 x 450 x 300 mm |
| Weight | Approx. 15 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 60 W (operating), 0.5 W (standby) |
| Supported Media Width | 10" to 64" (254 mm to 1626 mm) |
| Maximum Roll Diameter | 250 mm |
| Maximum Roll Weight | 25 kg |
| Cutting Method | Automatic guillotine cutter |
| Cutting Speed | Up to 50 cuts per minute |
| Supported Media Types | Paper, vinyl, film, canvas, fabric |
| Interfaces | USB 2.0, Ethernet |
| Operating Temperature | 10°C to 35°C |
| Operating Humidity | 20% to 80% (non-condensing) |
| Maintenance | Clean rollers and cutter blade regularly |
| Safety Features | Emergency stop button, cover interlock |
| Replaceable Parts | Cutter blade, rollers |
| Repairability | User-replaceable cutter blade and rollers |
| Warranty | 1 year limited |
Frequently Asked Questions - RC620+ EPSON
What is the Epson RC620+ used for?
The Epson RC620+ is a roll media feeder and automatic cutter designed for use with large-format printers to handle roll media up to 64 inches wide.
What media types does the RC620+ support?
It supports various media types including paper, vinyl, film, canvas, and fabric, with a maximum roll weight of 25 kg.
How do I load a roll onto the RC620+?
Place the roll on the spindle, secure it with the end caps, then feed the media through the guides and into the printer. Ensure the media is centered and tension is adjusted.
How do I perform a cut with the RC620+?
The cutter operates automatically after printing. You can also manually trigger a cut using the control panel or software command. Ensure the blade is sharp for clean cuts.
How do I clean the RC620+?
Regularly clean the feed rollers with a lint-free cloth dampened with isopropyl alcohol. Clean the cutter blade area to remove adhesive residue. Refer to the manual for detailed steps.
How do I replace the cutter blade?
Turn off the unit, open the cutter cover, loosen the blade retaining screws, remove the old blade, and install a new one. Tighten screws and close the cover. Always use genuine Epson replacement blades.
What should I do if the media jams?
Press the emergency stop button, turn off the unit, and carefully remove the jammed media. Check for obstructions and ensure the media is loaded correctly before resuming.
Can the RC620+ be used with any large-format printer?
It is designed for Epson large-format printers (e.g., SureColor series). Compatibility with other brands is not guaranteed. Check the printer's specifications or consult Epson support.
What is the maximum roll diameter for the RC620+?
The maximum roll outer diameter is 250 mm (approx. 9.8 inches). Heavier rolls should not exceed 25 kg to avoid damage.
How do I update the firmware on the RC620+?
Download the latest firmware from the Epson support website. Connect via USB, run the update tool, and follow on-screen instructions. Do not power off during the update.
User questions about RC620+ EPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual RC620+ - EPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RC620+ by EPSON.
USER MANUAL RC620+ EPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EPSON
Model : RC620+
Category : Controller