GKN 16220 FX - Refrigerator GRUNDIG - Free user manual and instructions

Product Type	Freestanding Refrigerator
Brand	Grundig
Model	GKN 16220 FX
Height (mm)	1850
Width (mm)	595
Depth (mm)	650
Weight (kg)	65
Power Supply	220-240 V ~ 50 Hz
Energy Class	A+
Annual Energy Consumption (kWh)	250
Noise Level (dB)	40
Climate Class	N-ST
Total Net Capacity (L)	320
Fridge Net Capacity (L)	230
Freezer Net Capacity (L)	90
Freezing Capacity (kg/24h)	5
NoFrost Technology	Yes (Freezer)
Shelves Material	Adjustable Glass Shelves
Interior Light	LED
Reversible Door	Yes
Defrosting	Automatic (Fridge), Manual (Freezer)
Refrigerant	R600a
Child Lock	No
Control Type	Electronic with Display
Spare Parts Availability	Minimum 7 years (EU regulation)

Frequently Asked Questions - GKN 16220 FX GRUNDIG

How do I adjust the temperature?

Press the temperature control button on the display panel. Use + or - to set the desired fridge and freezer temperature. Recommended: fridge 4°C, freezer -18°C.

Why is my fridge making unusual noises?

Normal operational sounds include gurgling from refrigerant flow, clicking when compressor starts/stops, and fan noise from cooling. If loud rattling occurs, check if the appliance is level or if items are vibrating.

How do I defrost the freezer?

For manual defrost freezers: turn off the appliance, remove food, leave door open, and place towels to absorb water. Do not use sharp objects. NoFrost models defrost automatically.

What should I do if the fridge is not cooling?

Check power (plug, fuse), thermostat setting, and ensure ventilation grilles are clean. Wait 24 hours after installation for stabilization. If persists, contact service.

Can I reverse the door opening direction?

Yes, the door is reversible. Follow the manual instructions: remove hinges, transfer to opposite side, and adjust levelling feet. Use a screwdriver and spanner.

How to clean the fridge?

Unplug the appliance. Remove shelves and drawers. Wipe with warm water and mild detergent. Avoid abrasive cleaners. Dry thoroughly before restarting. Clean condenser coils twice a year.

What is the maximum freezing capacity?

The freezer can freeze up to 5 kg of fresh food in 24 hours. Do not exceed this limit to maintain performance.

How to change the internal light bulb?

If equipped with LED light, it may not be user-serviceable. For standard bulbs, disconnect power, remove the cover, and replace with same type (E14, max 15W). Contact service if LED fails.

What should I do if water leaks inside?

Check if the drain hole is blocked. Clean with a cotton swab or pipe cleaner. Ensure food does not block the drain. Also check door seals for damage.

How long does it take to reach the set temperature after first use?

Typically 4 to 6 hours. Avoid frequent door openings. Do not store large amounts of food until temperature stabilizes.

USER MANUAL GKN 16220 FX GRUNDIG

1. Important instructions for safety and environment 5

1.1 General safety ....5 1.1.1 HC warning......8 1.1.2 For products with a water dispenser 9 1.2 Intended use......9 1.3 Children's safety .....10 1.4 Compliance with WEEE Directive and Disposing of the Waste Product: 10 1.5 Compliance with RoHS Directive: 10 1.6 Package information......10

3.1 Appropriate installation location ....12 3.2 Installing the plastic wedges 13 13 3.3 Electrical connection .....13 3.4 Illumination lamp .....13

4. Preparation 14

4.1 Things to be done for energy saving....14 4.2 Initial use 15

5. Operating the product 16

5.1 Indicator panel 16 5.2 Dual cooling system......18 5.3 Freezing fresh food......18 5.4 Recommendations for preserving the frozen food......21 5.5 Placing the food .....22 5.6 Deep-freeze information ..22 5.7 Changing the door opening direction....22 5.8 Open door warning .....22 5.9 Recommendations for freshfood compartment .....23

6. Maintenance and cleaning 24

6.1 Avoiding bad odours......24 6.2 Protecting the plastic surfaces 24

7. Troubleshooting 25

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you an effective service.

For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references.

The user manual will help you use the product in a fast and safe way.

Will help you use your appliance in a fast and safe way.

Read the manual before installing and operating your product.

Follow the instructions, especially those for safety.

Keep the manual in an easily accessible place as you may need it later.

Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

	Important information or useful usage tips.
	Warning against dangerous conditions for life and property.
	Warning against electric voltage.
	Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.

1. Important instructions for safety and environment

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

1.1 General safety

• This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone.
• Unplug the product if a failure occurs while it is in use.
• If the product has a failure, it should not be operated unless it is repaired by the Authorised Service Agent. There is the risk of electric shock!
• Connect the product to a grounded outlet protected by a fuse complying with the values in the rating plate. Have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations. Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
• It is recommended to clean the tip of the plug regularly with a dry cloth.
• Do not plug the refrigerator if the wall outlet is loose.
• Never connect your refrigerator to electricity-saving systems. Such systems are harmful for the product.
• Unplug the product during installation, maintenance, cleaning and repairing procedures.
• Always have the installation and repairing procedures carried out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
• Do not eat cone ice cream and ice cubes immediately after you take them out of the freezer compartment! This may cause frostbite in your mouth!
• Do not touch frozen food by hand! They may stick to your hand!
• Do not put bottled and canned liquid beverages in the freezer compartment. They may burst!
• Never use steam and steam assisted cleaning materials to clean or defrost the refrigerator. Steam will cause short circuit or electric shock since it would get into contact with the electrical parts in the refrigerator!
• The product shall never be used while the compartment which is located at the top or back of your product and in which electronic boards are available (electronic board box cover) (1) is open.

• Do not use mechanical devices or other methods to accelerate the defrosting process, other than those recommended by the manufacturer.
• Never use the parts on your refrigerator such as the door and drawer as a means of support or step. This will cause the product to tip over or parts of it get damaged.

• Do not damage the cooling circuit, where the refrigerant is circulating, with drilling or cutting tools. The refrigerant that might blow out when the gas channels of the evaporator, pipe extensions or surface coatings are punctured may cause skin irritations and eye injuries.
• Do not cover or block the ventilation holes on the refrigerator with any material.
• Place the beverage with higher proofs tightly closed and vertically.
• Do not use gaseous sprays near the product since there is the risk of fire or explosion!
• Flammable items or products that contain flammable gases (e.g. spray) as well as the explosive materials should never be kept in the appliance.
• Do not place containers filled with liquid on top of the product. Spilling water on an electrical component may cause electric shocks or risk of fire.
• Do not store products (vaccines, heat-sensitive medicines, scientific materials and etc.) that require a precise temperature control in the refrigerator.
• If you will not operate the product for a long period of time, unplug and unload the food in it.
• If the product is equipped with blue light, do not look at the blue light with optical tools.
• Exposing the product to rain, snow, sun and wind is dangerous with respect to electrical safety.
• In products with mechanical control (thermostat), wait for minimum 5 minutes to plug in the product again after unplugging it.
• Do not overload the product. It may fall when the door is opened, and cause injury or damage. Similar problems may occur in case of putting things on top of the product.
• The door is equipped with a handle. Do not pull the product by the handle when moving it, as the handle may become loose.
• Be careful not to get your hand or any part of your body caught in the moving parts inside the product.

1.1.1 HC warning

If the product is equipped with a cooling system containing R600a gas, be careful not to damage the cooling system and piping during use and transportation. This gas is flammable. If the cooling system is damaged, keep the product away from potential sources of ignition and ventilate the room where the unit is placed immediately.

i	If the product is equipped with a cooling system containing R134a gas, ignore this warning.
i	You can learn the gas used in production of your product on the rating plate located on the left inner part of it.

1.1.2 For products with a water dispenser

• The pressure for cold water inlet shall be a maximum of 90 psi (8 bar). If your water pressure exceeds 6.2 psi (5.5 bar), use a pressure limiting valve in your mains system. If you do not know how to check your water pressure, ask for the help of a professional plumber.
• If there is a risk of water hammer effect in your installation, always use a water hammer prevention equipment in your installation. Consult professional plumbers if you are not sure that there is no water hammer effect in your installation.
• Do not install on the hot water inlet. Take precautions against the risk of freezing of the hoses. The water temperature operating interval shall be a minimum of 33°F (0.6°C) and a maximum of 100°F (38°C). Use only potable water.

1.2 Intended use

• This product has been designed for domestic use. It is not suitable for commercial use and must not be used out of its intended use. The product must be used only for storing food.
• The manufacturer waives any responsibility arising from incorrect usage or transportation.
• Original spare parts will be provided for 10 years following the product purchasing date.

1.3 Children's safety

• Packaging materials are dangerous for children. Keep packaging materials in a safe place away from the reach of children.
• Electrical products are dangerous for children. Keep children away from the product when it is in use.
• If the product's door is equipped with a lock, keep the keys away from reach of children.

1.4 Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

1.5 Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.6 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

1. Butter & Cheese sections
2. Indicator Panel
3. Egg tray
4. Adjustable door shelves
5. Bottle shelf
6. Shelter wire
7. Adjustable front feet
8. Freezer compartment
9. Crisper
10. Chiller
11. Chiller cover and glass
12. Adjustable shelves
13. Wine cellar
14. Fan

* optional

Figures in this user manual are schematic and may not match the product exactly. If the subject parts are not included in the product you have purchased, then those parts are valid for other models.

3. Installation

Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, make sure that the electricity installation is appropriate before calling the Authorised Service Agent. If not, call a qualified electrician to have any necessary arrangements carried out.

	Preparation of the location and electrical installation at the place of installation is under customer's responsibility.
	Product must not be plugged in during installation. Otherwise, there is the risk of death or serious injury!
	WARNING: Installation and electrical connections of the product must be carried out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
	WARNING: Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
	Make sure that the power cable is not pinched or crushed while pushing the product into its place after installation or cleaning procedures.

3.1 Appropriate installation location

WARNING: If the door of the room where the product will be placed is too small for the product to pass, then the product's doors must be removed and the product must be turned aside to pass it through.

• Choose a place at where you would use the product comfortably. • Install the product at least 30 cm away from heat sources such as hobs, ovens, heater cores and stoves and at least 5 cm away from electrical ovens. Product must not be subjected to direct sun light and kept in humid places after installation.
• Appropriate air ventilation must be provided around your product in order to achieve efficient operation. If the product is to be placed in a recess in the wall, pay attention to leave at least 5 cm distance with the ceiling and side walls.
• Do not place the product on materials such as rugs or carpets.
• Place the product on an even floor surface to prevent jolts.
• Your product can operate in ambient temperatures between -5°C to +43°C.

If two coolers are to be installed side by side, there should be at least 4 cm distance between them.

3.2 Installing the plastic wedges

Plastic wedges are used to create the distance for the air circulation between the product and the rear wall. Insert the 2 plastic wedges onto the rear ventilation cover as illustrated in the figure. To install the wedges, remove the screws on the product and use the screws given in the same pouch with the wedges.

3.3 Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the rating plate. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• Electrical connection must comply with national regulations. • Power cable plug must be within easy reach after installation. - The voltage and allowed fuse or breaker protection are specified in the Rating Plate which is affixed to interior of the product. If the current value of the fuse or breaker in the house does not comply with the value in the rating plate, have a qualified electrician install a suitable fuse. - The specified voltage must be equal to your mains voltage. - Do not make connections via extension cables or multi-plugs.

WARNING: Damaged power cable must be replaced by the Authorised Service Agents.

WARNING: If the product has a failure, it should not be operated unless it is repaired by the Authorised Service Agent! There is the risk of electric shock!

3.4 Illumination lamp

Do not attempt to repair yourself but call the Authorised Service Agent if the LED illumination lamps do not go on or are out of order. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place foodstuffs in the refrigerator/freezer in a safe and comfortable way.

4. Preparation

4.1 Things to be done for energy saving

Connecting the product to electric energy saving systems is risky as it may cause damage to the product.

• Do not leave the doors of your refrigerator open for a long time. When doors are open, warm air enters the fridge/freezer cabinets and the appliance consumes more energy to cool down the foodstuffs.
• Do not put hot food or drinks in your refrigerator.
• Do not overload the refrigerator. Cooling capacity will fall when the air circulation inside is hindered.
• Do not place the refrigerator in places subject to direct sunlight. Install the product at least 30 cm away from heat sources such as hobs, ovens, heater cores and stoves and at least 5 cm away from electrical ovens.
• Pay attention to store your food in the refrigerator in closed containers.

- The baskets/drawers that are provided with the chill compartment must always be in use for low energy consumption and for better storage conditions.

- Food contact with the temperature sensor in the freezer compartment may increase energy consumption of the appliance. Thus any contact with the sensor(s) must be avoided.

- You can load maximum amount of food to the freezer compartment of the refrigerator by removing the freezer compartment drawers. Declared energy consumption value of the refrigerator was determined with the freezer compartment drawers and top compartment flap removed and given wire shelf is used at the bottom of the freezer compartment for maximum amount of food loaded. Drawers can be used for food storage when needed, which may be more comfortable depending on the shape and size of the food.

- Thawing frozen food in the fridge compartment will both provide energy saving and preserve the food quality.

- Do not block the freezer fan grill by placing foods in front.

• Please use provided 2 pieces of cold packs (PCM) at recommended places in the figure below when storing foodstuffs in freezer compartments. It also helps to keep your foodstuffs colder for longer when electricity is off or your appliance is unplugged. Temperature rise time is declared with cold packs in use.
• Use of cold packs (PCM) as illustrated below is advised to improve energy efficiency of your appliance as declared on energy label.

The ambient temperature of the room where you install the refrigerator should at least be -15°C. Operating your refrigerator at colder conditions than -15°C is not recommended.

Inside of your refrigerator must be cleaned thoroughly.

If two coolers are to be installed side by side, there should be at least 4 cm distance between them.

4.2 Initial use

Before starting to use the product, check that all preparations are made in accordance with the instructions in sections “Important instructions for safety and environment” and “Installation”.

• Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section. Check that inside of it is dry before operating it.
• Plug the refrigerator into the grounded wall outlet. When the door is opened the interior illumination will turn on.
• Run the refrigerator without putting any food for 6 hours and do not open its door unless certainly required.

You will hear a noise when the compressor starts up. The liquids and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.

Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

Such loading will result in higher energy consumption and worsen freezer storage performance of your appliance.

5. Operating the product

5.1 Indicator panel

1. Quick Fridge Function:

Quick Fridge indicator turns on when the Quick Fridge function is on. Press Quick Fridge button again to cancel this function. Quick Fridge indicator will turn off and normal settings will be resumed. Quick Fridge function will be cancelled automatically 2 hours later if you do not cancel it manually. If you want to cool plenty amount of fresh food, press Quick Fridge button before you place the food into the fridge compartment.

2. Quick Fridge Indicator :

This icon comes on when the Quick Fridge function is on.

3. Quick Freeze Function:

The Quick Freeze indicator turns on when the Quick Freeze function is on. Press the Quick Freeze button

again to cancel this function. The Quick Freeze indicator will turn off and normal settings will be resumed. The Quick Freeze function will be cancelled automatically 34 hours later if you do not cancel it manually. If you want to freeze a large amount of food, press the Quick Freeze button before placing the food into the freezer compartment.

4. Quick Freeze Indicator:

This icon comes on when the Quick Freeze function is on.

5. Fridge Set Function:

This function allows you to set the temperature of the fridge compartment. Press this button to set the temperature to 8, 7, 6, 5, 4, 3, and 2 respectively.

Figures in this user manual are schematic and may not match the product exactly. If the subject parts are not included in the product you have purchased, then those parts are valid for other models.

6. Fridge Compartment

Temperature Setting Indicator:

Indicates the temperature set for the fridge compartment.

7. Eco Extra Function:

Press the Eco Extra button for 3 seconds to activate the Eco Extra Function. The freezer will start operating in the most economic mode at least 6 hours later, and the economic usage indicator will turn on when the function is active. Press the Eco Extra button for 3 seconds again to deactivate the Eco Extra Function.

8. Eco Extra Indicator:

This icon lights up when the Vacation Function is active.

9. High Temperature/Error Warning Indicator:

This light comes on during high temperature failures and error warnings. If you see this light is on, please check the “Recommended Solutions for the Problems” section in your manual.

10. Economic Usage Indicator:

This icon comes on when the Fridge Compartment is set to 8°C and Freezer Compartment is set to -18°C, which are the most economical set values. The Economic Usage Indicator turns off when the Quick Fridge or Quick Freeze function is selected.

11. Energy Saving Function (Display Off):

When you press this button, the Energy Saving icon will light up and the Energy Saving Function will be activated. If the Energy Saving Function is active, all icons on the display other than the Energy Saving icon will turn off. When the Energy Saving Function is active, if any button is pressed or the door is opened, the Energy Saving Function will be exited and the icons on the display will return to normal. If you press this button again, the Energy Saving icon will turn off and the Energy Saving Function will not be active.

12. Energy Saving Indicator:

This icon (“-”) lights up when the Energy Saving Function is selected.

13. Key Lock Mode:

Press the Key Lock button concurrently for 3 seconds. The Key Lock icon will light up and Key Lock mode will be activated. Buttons will not function if the Key Lock mode is active. Press the Key Lock button concurrently for 3 seconds again. The Key Lock icon will turn off and Key Lock mode will be exited.

14. Key Lock Indicator:

This icon lights up when the Key Lock mode is activated.

15. Freezer Set Function:

This function allows you to make the Freezer compartment temperature setting. Press this button to set the temperature of the freezer compartment to -18, -19, -20, -21, -22, -23, and -24, respectively.

16. Freezer Compartment Setting Indicator:

Indicates the temperature set for the Freezer Compartment.

17. Vacation Function:

When you press the Vacation button, the vacation function is activated and the vacation indicator lights up. You can use this function when you will not use your fridge for a long time. Note that there should be no food inside your fridge, otherwise the fridge cannot preserve your food in Vacation mode. If this function is activated, the fridge compartment temperature is kept at 15°C to prevent bad odors. Press the Vacation button again to deactivate the vacation function.

18. Vacation Indicator:

This icon lights up when the Vacation Function is active.

5.2 Dual cooling system

Your cooler/freezer is equipped with three separate cooling systems to cool the fresh food compartment, frozen food compartment, and multi-zone compartment. Thus, air and odor in the fresh food compartment and frozen food compartment do not get mixed. Thanks to these two separate cooling systems, cooling speed is much higher than other cooler/freezers. Also, additional power saving is provided since defrosting is performed individually.

5.3 Freezing fresh food

• Wrap the food or place it in a covered container before putting it in the cooler/freezer.
• Hot food and beverages must cool down to room temperature before putting them in the cooler/freezer.
• The food that you want to freeze must be fresh and in good quality.
• Divide the food into portions according to your family's daily or meal-based consumption needs.
• Pack the food in an airtight manner to prevent them from drying even if they are going to be stored for a short time.
• Materials to be used for packaging must be tear-proof and resistant to cold, humidity, odour, oils and acids and they must also be airtight. Moreover, they must be well closed and they must be made from easy-to-use materials that are suitable for deep-freezers.
• Take special care not to mix already frozen food and fresh food. (They should not be allowed to come in contact with the previously frozen items to prevent their partial thawing.)
• Frozen food must be used immediately after they are thawed and they should never be re-frozen.
• Do not freeze too large quantities of food at one time. The quality of the food is best preserved when it is frozen right through to the core as quickly as possible.
• Placing warm food into the freezer compartment causes the cooling system to operate continuously until the food is frozen solid.
• Maximum frozen food storage volume is achieved without using the drawers and the upper shelf cover provided in the freezer compartment. Energy consumption of your appliance is declared while the freezer compartment is fully loaded on shelves without the use of the drawers and upper shelf cover. Use the given wire shelf at the bottom of the freezer compartment for a better energy consumption performance.
• It is recommended that you place foodstuffs on top shelf of freezer for initial freezing.

- It is advised that provided cold packs are used as described below prior to using quick freeze function. It improves storage and quick-freezing performance of your freezer compartment.

Freezer Compartment Setting	Fridge Compartment Setting	Explanations
-18°C 4°C		This is the normal recommended setting.
-20, -24 or -24°C	4°C	These settings are recommended when the ambient temperature exceeds 30°C.
Quick Freeze 4°C		Use when you wish to freeze your food in a short time. Your cooler/freezer will return to its previous mode when the process is over.
-18°C or colder 2°C		Use these settings if you think that your fridge compartment is not cold enough because of the hot ambient conditions or frequent opening and closing of the door.
-18°C or colder Quick Fridge		Use this function when you place too much into the fridge compartment or when you need to cool your food quickly. It is recommended that you activate Quick Fridge function 4-8 hours before placing the food.

5.4 Recommendations for preserving the frozen food

• Frozen food that you have purchased should be stored in accordance with the frozen food manufacturer's instructions for a ⭐ (4 star) frozen food storage compartment.

- Note the following to ensure that the high quality achieved by the frozen food manufacturer and the food retailer is maintained:

1. Put packets in the freezer as quickly as possible after purchase.
2. Make sure that the contents of the package are labelled and dated.
3. Check whether the "Use By" and "Best Before" dates on the packaging are exceeded or not.

5.5 Placing the food

Freezer compartment shelves	Various frozen food such as meat, fish, ice cream, vegetables and etc.
Egg holder Egg
Fridge compartment shelves	Food in pans, covered plates and closed containers
Fridge compartment door shelves	Small and packaged food or beverage (such as milk, fruit juice, beer and etc.)
Crisper	Vegetables and fruits
Fresh zone compartment	Delicatessen products (cheese, butter, salami and etc.)

5.6 Deep-freeze information

Food must be frozen as rapidly as possible when it is put in a cooler/freezer in order to keep it in good quality.

It is possible to preserve the food for a long time only at -18° C or lower temperatures.

You can keep the freshness of food for many months (at -18° C or lower temperatures in the deep freeze).

Divide the food into portions according to your family's daily or meal-based consumption needs.

Pack the food in an airtight manner to prevent it from drying even if it is going to be stored for a short time.

• Materials necessary for packaging: • Cold-resistant adhesive tape • Self-adhesive label - Rubber rings - Pen

Materials to be used for packaging the foodstuff must be tear-proof and resistant to cold, humidity, odour, oils and acids.

Foods to be frozen should not be allowed to come in contact with the previously frozen items to prevent them from getting thawed partially.

Frozen food must be used immediately after it is thawed and it should never be re-frozen.

5.7 Changing the door opening direction

The door opening direction of your cooler/freezer can be changed according to the place where you are using it. If this is necessary, please call.

An audio warning will be given when the fridge or freezer compartment door of your product is left open for a certain period of time. This audio warning signal will mute when any button on the indicator is pressed or when the door is closed.

5.9 Recommendations for freshfood compartment

* OPTIONAL

• Please do not let any foodstuff come into contact with the temperature sensor in the freshfood compartment. In order to maintain the freshfood compartment at the ideal storage temperature, the sensor must not be blocked by foodstuffs.
• Do not place hot foodstuff in your appliance.

6. Maintenance and cleaning

The service life of the product extends and frequently faced problems decrease if cleaned at regular intervals.

WARNING: Unplug the product before cleaning it.

• Never use gasoline, benzene or similar substances for cleaning purposes.
• Never use any sharp and abrasive tools, soap, household cleaners, detergent and wax polish for cleaning.
• Dissolve one teaspoon of carbonate in half a litre of water. Soak a cloth with the solution and wring it thoroughly. Wipe the interior of the refrigerator with this cloth and then dry thoroughly.
• Make sure that no water enters the lamp housing and other electrical items.
• If you will not use the refrigerator for a long period of time, unplug it, remove all food inside, clean it and leave the door ajar.
• Check regularly that the door gaskets are clean. If not, clean them.
• To remove door and body shelves, remove all of their contents.
• Remove the door shelves by pulling them up. After cleaning, slide them from top to bottom to install.

- Never use cleaning agents or water that contain chlorine to clean the outer surfaces and chromium coated parts of the product. Chlorine causes corrosion on such metal surfaces.

6.1 Avoiding bad odours

Materials that may cause odour are not used in the production of our refrigerators. However, due to inappropriate food preserving conditions and not cleaning the inner surface of the refrigerator as required can bring forth the problem of odour. Pay attention to following to avoid this problem:

• Keeping the refrigerator clean is important. Food residuals, stains, etc. can cause odour. Therefore, clean the refrigerator with carbonate dissolved in water every 15 days. Never use detergents or soap.
• Keep the food in closed containers. Microorganisms spreading out from uncovered containers can cause unpleasant odours.
• Never keep the food that have expired best before dates and spoiled in the refrigerator.

6.2 Protecting the plastic surfaces

Do not put liquid oils or oil-cooked meals in your refrigerator in unsealed containers as they damage the plastic surfaces of the refrigerator. If oil is spilled or smeared onto the plastic surfaces, clean and rinse the relevant part of the surface at once with warm water.

7. Troubleshooting

Please review this list before calling the service. It will save your time and money. This list includes frequent complaints that are not arising from defective workmanship or material usage. Some of the features described here may not exist in your product.

The refrigerator does not operate.

• The plug is not inserted into the socket correctly. >>> Insert the plug into the socket securely.
• The fuse of the socket which your refrigerator is connected to or the main fuse have blown out. >>> Check the fuse.

Condensation on the side wall of the fridge compartment (MULTIZONE, COOL CONTROL and FLEXI ZONE).

• Door has been opened frequently. >>> Do not open and close the door of the refrigerator frequently.
• Ambient is very humid. >>> Do not install your refrigerator in highly humid places.
• Food containing liquid is stored in open containers. >>> Store food with liquid content in closed containers.
• Door of the refrigerator is left ajar. >>> Do not leave the doors of your refrigerator open for a long time.
• Thermostat is set to a very cold level. >>> Set the thermostat to a suitable level.

Compressor is not running.

• Protective thermic of the compressor will blow out during sudden power failures or plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator has not been balanced yet. The refrigerator will start running approximately after 6 minutes. Please call the Authorised Service Agent if the refrigerator does not start at the end of this period.
• The fridge is in defrost cycle. >>> This is normal for a full-automatically defrosting refrigerator. Defrosting cycle occurs periodically.
• The refrigerator is not plugged into the socket. >>> Make sure that the plug is fit into the socket.
• Temperature settings are not made correctly. >>> Select the suitable temperature value.
• There is a power outage. >>> Refrigerator returns to normal operation when the power restores.

The operation noise increases when the refrigerator is running.

- The operating performance of the refrigerator may change due to the changes in the ambient temperature. It is normal and not a fault.

The refrigerator is running frequently or for a long time.

• New product may be wider than the previous one. Larger refrigerators operate for a longer period of time.
• The room temperature may be high. >>> It is normal for the product to operate for longer periods in hot ambient conditions.
• The refrigerator might have been plugged in recently or loaded with food. >>> When the refrigerator is plugged in or loaded with food recently, it will take longer to reach the set temperature. This is normal.
• Large amounts of hot food might have been put in the refrigerator recently. >>> Do not put hot food into the refrigerator.
• Doors might be opened frequently or left ajar for a long time. >>> The warm air that has entered the refrigerator causes it to run for longer periods. Do not open the doors frequently.
• The freezer or fridge compartment door might be left ajar. >>> Check if the doors are closed completely.
• The refrigerator is adjusted to a very low temperature. >>> Adjust the refrigerator temperature to a warmer setting and wait until the temperature is achieved.
• The door seal of the fridge or freezer may be soiled, worn out, broken, or not properly seated. >>> Clean or replace the seal. A damaged or broken seal causes the refrigerator to run for a longer period of time to maintain the current temperature.

The freezer temperature is very low while the fridge temperature is sufficient.

- The freezer temperature is adjusted to a very low value. >>> Adjust the freezer temperature to a warmer setting and check.

The fridge temperature is very low while the freezer temperature is sufficient.

- The fridge temperature is adjusted to a very low value. >>> Adjust the fridge temperature to a warmer setting and check.

Food kept in the fridge compartment drawers is frozen.

- The fridge temperature is adjusted to a very high value. >>> Adjust the fridge temperature to a lower value and check.

The temperature in the fridge or freezer is very high.

• The fridge temperature is adjusted to a very high value. >>> The fridge compartment temperature setting has an effect on the temperature of the freezer. Change the temperatures of the fridge or freezer and wait until the relevant compartments reach a sufficient temperature.
• Doors are opened frequently or left ajar for a long time. >>> Do not open the doors frequently. • Door is ajar. >>> Close the door completely.
• The refrigerator is plugged in or loaded with food recently. >>> This is normal. When the refrigerator is plugged in or loaded with food recently, it will take longer for it to attain the set temperature.
• Large amounts of hot food might be put in the refrigerator recently. >>> Do not put hot food into the refrigerator.

Vibrations or noise.

• The floor is not level or stable. >>> If the refrigerator rocks when moved slowly, balance it by adjusting its feet. Also make sure that the floor is strong enough to carry the refrigerator, and level.
• The items put onto the refrigerator may cause noise. >>> Remove the items on top of the refrigerator.

There are noises coming from the refrigerator like liquid flowing, spraying, etc.

- Liquid and gas flows occur in accordance with the operating principles of your refrigerator. >>>It is normal and not a fault.

Whistle comes from the refrigerator.

- Fans are used in order to cool the refrigerator. It is normal and not a fault.

Condensation on the inner walls of refrigerator.

• Hot and humid weather increases icing and condensation. It is normal and not a fault.
• Doors are opened frequently or left ajar for a long time. >>> Do not open the doors frequently. Close them if they are open. • Door is ajar. >>> Close the door completely.

Humidity occurs on the outside of the refrigerator or between the doors.

• There might be humidity in the air; this is quite normal in humid weather. >>> When the humidity is less, condensation will disappear.
• If moisture forms in the area between the two refrigerator doors, disable the “Energy Saving” mode.

Bad odour inside the refrigerator.

• No regular cleaning is performed. >>> Clean the inside of the refrigerator regularly with a sponge, lukewarm water or carbonate dissolved in water.
• Some containers or package materials may cause the smell. >>> Use a different container or different brand packaging material.
• Food is put into the refrigerator in uncovered containers. >>> Keep the food in closed containers. Microorganisms spreading out from uncovered containers can cause unpleasant odours.
• Remove the foods that have expired best before dates and spoiled from the refrigerator.

The door is not closing.

• Food packages are preventing the door from closing. >>> Replace the packages that are obstructing the door.
• The refrigerator is not completely even on the floor. >>> Adjust the feet to balance the refrigerator.
• The floor is not level or strong. >>> Also make sure that the floor is level and strong enough to carry the refrigerator.

Crispers are stuck.

- The food is touching the ceiling of the drawer. >>> Rearrange food in the drawer.

WARNING: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a non-functional product yourself.