MP100 - Receiver MCINTOSH - Free user manual and instructions
Find the device manual for free MP100 MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | McIntosh |
| Model | MP100 |
| Dimensions (W x H x D) | 17.5 inches x 6 inches x 18 inches |
| Weight | 30 lbs |
| Power Supply | 120V, 50/60Hz |
| Power Output | 100W per channel into 8 ohms |
| Total Harmonic Distortion | 0.005% |
| Frequency Response | 20Hz - 20kHz ±0.5dB |
| Signal-to-Noise Ratio | 110dB |
| Inputs | Phono (MM/MC), 2x Analog, 2x Optical, 2x Coaxial, USB |
| Outputs | Speaker (A/B), Pre-out, Headphone |
| Tuner Bands | AM, FM |
| Remote Control | Included |
| Rack Mountable | Yes (optional brackets) |
| Maintenance | Clean with dry soft cloth; avoid solvents and liquids |
| Safety | Read manual before use; do not expose to moisture or heat |
| Spare Parts | Contact authorized McIntosh dealer |
| Repairability | Service by qualified technician only |
| Warranty | 90 days labor, 3 years parts (90 days tubes) |
Frequently Asked Questions - MP100 MCINTOSH
How do I connect my speakers to the MP100?
Use high-quality speaker wire with banana plugs or bare wires. Connect to the Speaker A or Speaker B terminals on the rear panel, ensuring correct polarity (+ to +, - to -).
Can I use the MP100 with a turntable?
Yes, the MP100 has a dedicated Phono input that supports both Moving Magnet (MM) and Moving Coil (MC) cartridges. Set the switch accordingly.
How do I reset the MP100 to factory settings?
Press and hold the Power button while pressing the Menu button until 'Reset' appears on the display. Confirm with the Enter button.
What is the maximum power output of the MP100?
The MP100 delivers 100 watts per channel into 8 ohms, with both channels driven, from 20Hz to 20kHz with less than 0.005% THD.
Does the MP100 support Bluetooth?
No, the MP100 does not have built-in Bluetooth. You can add an external Bluetooth receiver via an analog input.
How do I update the firmware on the MP100?
Firmware updates are not user-serviceable. Contact an authorized McIntosh dealer for assistance.
What type of remote control is included?
The MP100 comes with the McIntosh HR091 remote control, which operates via infrared and includes buttons for volume, input selection, and tuner functions.
Can I bi-amp my speakers with the MP100?
Yes, you can use both Speaker A and Speaker B outputs to bi-amp compatible speakers. Ensure proper configuration in the speaker setup menu.
How do I clean the MP100?
Use a soft, dry cloth to gently wipe the chassis and glass front panel. Do not use any liquids or abrasive cleaners.
What should I do if the MP100 overheats?
Ensure adequate ventilation around the unit. If overheating persists, turn off the receiver and let it cool. Check for blocked vents or high ambient temperature. If the issue continues, consult McIntosh service.
User questions about MP100 MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MP100 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP100 by MCINTOSH.