DA2 - Receiver MCINTOSH - Free user manual and instructions
Find the device manual for free DA2 MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | McIntosh |
| Model | DA2 |
| Dimensions (W x H x D) | 17.5 in x 6.0 in x 15.0 in |
| Weight | 22.5 lb |
| Power Output | 100 W per channel (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Total Harmonic Distortion | 0.005% (at rated power) |
| Inputs | Phono (MM), 3x Line, 1x Balanced (XLR), 1x Digital Coaxial, 1x Optical |
| Outputs | Speaker terminals, Pre-out, Headphone |
| Amplifier Technology | Solid-state with McIntosh Autoformer |
| Power Consumption | 300 W (max), 0.5 W (standby) |
| Remote Control | Included |
| Finish | Black glass front panel with polished stainless steel chassis |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Certifications | UL, CE, RoHS |
| Repairability | Modular design; authorized service centers only. |
| Warranty | 3 years (parts and labor) |
Frequently Asked Questions - DA2 MCINTOSH
How do I connect my turntable to the DA2?
Connect your turntable's RCA cables to the Phono input. Ensure your turntable has a moving magnet (MM) cartridge or use an external preamp for moving coil (MC) cartridges.
Can I use the DA2 with 4-ohm speakers?
Yes, the DA2 is stable into 4 ohms and delivers approximately 180 W per channel into 4 ohms.
Does the DA2 have a headphone output?
Yes, a dedicated headphone output is located on the front panel for private listening.
What is the Autoformer technology?
The Autoformer is a McIntosh innovation that allows the amplifier to deliver full power regardless of speaker impedance, ensuring consistent performance.
How do I perform a factory reset?
With the unit off, press and hold the Power button for 10 seconds until the front panel LED flashes, then release.
Can I bi-amp my speakers with the DA2?
No, the DA2 is a stereo receiver with one set of speaker outputs per channel. Bi-amping requires two amplifiers.
What is the recommended cleaning method for the glass front panel?
Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol or ammonia-based cleaners, as they may damage the glass.
Does the DA2 include a phono preamp?
Yes, the Phono input has a built-in preamp for moving magnet (MM) cartridges.
What is the power consumption in standby mode?
The DA2 consumes less than 0.5 W in standby mode for energy efficiency.
Where can I find the serial number?
The serial number is located on the rear panel near the power cord entry.
User questions about DA2 MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DA2 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DA2 by MCINTOSH.
USER MANUAL DA2 MCINTOSH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MCINTOSH
Model : DA2
Category : Receiver