XL Deluxe U3700 - Vacuum Cleaner Oreck - Free user manual and instructions
Find the device manual for free XL Deluxe U3700 Oreck in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Canister vacuum cleaner |
| Brand | Oreck |
| Model | XL Deluxe U3700 |
| Dimensions (L x W x H) | 30 x 25 x 20 cm |
| Weight | 4.5 kg |
| Power supply | 120 V, 60 Hz, 7 A |
| Rated power | 800 W |
| Bag capacity | 1.5 L |
| Filter type | Washable HEPA filter |
| Filtration system | Cyclonic and HEPA |
| Cord length | 7.6 m |
| Operating radius | 10.5 m |
| Main nozzle | Motorized head with brush roll |
| Included accessories | Crevice tool, dusting brush, upholstery tool |
| Noise level | 72 dB (A) |
| Height adjustment | 6 positions |
| Bag full indicator | Yes |
| Automatic shut-off in case of overheating | Yes |
| Bag type | Paper bag (Oreck model C) |
| Maintenance | Empty or replace the bag, wash the HEPA filter every 6 months |
| Spare parts available | Bags, filters, belts, brushes, crevice tools |
| Repairability | Repairability index: 7.5/10 |
| Warranty | 2 years |
Frequently Asked Questions - XL Deluxe U3700 Oreck
How to change the bag of the Oreck XL Deluxe U3700 vacuum cleaner?
Unplug the appliance, open the front compartment, remove the full bag and insert a new Oreck model C bag aligning the slots. Close the cover until it clicks.
How to clean the HEPA filter?
Remove the HEPA filter located behind the bag compartment. Rinse it with cold water without detergent, let it dry completely for 24 hours before reinstalling.
The bag full indicator lights up even though the bag is not full, what to do?
Check that the bag is properly installed and the cover is closed correctly. If the problem persists, the sensor may be obstructed: clean the sensor window with a dry cloth.
How to adjust the brush roll height?
Use the pedal located on the vacuum head. Turn it to select among the 6 positions depending on the floor type (high carpet, low carpet, hard floor).
The vacuum cleaner does not turn on, what to check?
Make sure the power outlet works and the cord is not damaged. Check the on/off switch. If nothing works, the thermal fuse may have blown: contact customer service.
How to replace the brush roll belt?
Unplug the vacuum, remove the bottom plate of the head with a screwdriver. Remove the old belt, place the new one around the pulley and brush roll, then reassemble the plate.
Should I use original Oreck bags?
It is recommended to use original Oreck bags to ensure optimal filtration and avoid damaging the motor. Generic bags may not provide a good seal.
The vacuum makes an abnormal noise, what are the possible causes?
An unusual noise can come from a blockage in the tube or nozzle, a clogged brush roll, or a worn belt. Check and clean the passages, replace the belt if necessary.
How to maintain the brush roll?
Cut off power, remove the plate and remove hairs and threads wrapped around the roller using scissors. Do this regularly to maintain efficiency.
Where to find spare parts for the Oreck XL Deluxe U3700?
You can order spare parts (bags, filters, belts, brushes) on the official Oreck website or from authorized dealers. Consult the manual for exact references.
User questions about XL Deluxe U3700 Oreck
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual XL Deluxe U3700 - Oreck and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XL Deluxe U3700 by Oreck.