GH 2802 SILENT - Mechanical chipper GUDE - Free user manual and instructions

Brand	Güde
Model	GH 2802 SILENT
Product type	Mechanical chipper (shredder)
Power supply	Electric, 230 V / 50 Hz
Motor power	2800 W
Maximum branch diameter	40 mm
Collection bin capacity	50 L
Weight	27 kg
Dimensions (L × W × H)	60 × 40 × 85 cm
Sound level (LpA)	93 dB(A)
Motor type	Silent induction electric motor
Cutting system	Cutting roller with hardened steel blades
Rotation speed	40 rpm
Reverse function	Yes, to unblock the rotor
Safety device	Safety switch with overload protection
Pusher included	Yes, for safe filling
Chassis material	Robust steel with rust-proof paint
Transport wheels	Yes, two large wheels with tires
Maintenance and cleaning	Regular cleaning of the bin and rotor; blade sharpening recommended
Spare parts available	Yes, blades, bin, pusher, power cable
Manufacturer warranty	2 years (parts and labor)
Certification	CE, European conformity

Frequently Asked Questions - GH 2802 SILENT GUDE

How to start the Güde GH 2802 SILENT shredder?

Plug the device into a 230 V socket. Open the top safety cover, then close it. Press the on/off button (position I). The motor starts after a short safety delay.

What type of plant waste can be shredded with this model?

This shredder accepts branches up to 40 mm in diameter, hedge trimmings, dead leaves, and non-woody garden waste. Avoid hard branches like oak or beech over 40 mm.

How to maintain the shredder blades?

The blades are reversible and can be turned or sharpened. Unplug the device, remove the bin, disassemble the cutting unit according to the manual, then clean or sharpen the blades with a fine file. Reassemble in reverse order.

What to do if the motor does not start?

Check that the safety cover is properly closed, the bin is correctly engaged, and the thermal protection has not tripped. Wait 5 minutes before resetting. If the problem persists, contact customer service.

How to empty the collection bin safely?

Wait for the rotor to stop completely. Unplug the device. Remove the bin by pulling it outward. Wear gloves to avoid cuts. Empty the contents into a composter or bag.

The shredder makes an abnormal noise, what to do?

A metallic or vibrating noise may indicate a loose blade or a foreign object stuck. Unplug the device and inspect the rotor. Remove debris and check the tightness of the blade screws. If the noise persists, consult a technician.

Can wet branches be shredded?

Yes, but wet branches can clump and block the rotor. For best results, use slightly dry branches. If wet, shred in small amounts and clean the rotor regularly.

What is the capacity of the collection bin?

The transparent bin has a capacity of 50 liters. It allows monitoring the fill level. It must be emptied regularly to avoid jams.

How to use the reverse function?

If the rotor jams, press the reverse button (often marked 'R'). Hold it until the rotor turns in reverse and releases the stuck branch. Release then switch back to forward.

Where to find spare parts for the GH 2802 SILENT?

Spare parts (blades, bin, pusher, cable) are available from authorized Güde dealers or on the brand's website. Use the model number GH 2802 to identify compatible parts.

USER MANUAL GH 2802 SILENT GUDE

Translation of the original instructions

ELECTRIC GARDEN SHREDDER

GH 2802 SILENT

# 94376

DE Assembly

SI Assembly

GB Assembly

HR Assembly

FR Assembly

BG Assembly

IT Assembly

RO Assembly

NL Assembly

BA Assembly

CZ Assembly

SK Assembly

HU Assembly

1

1 | A

1 | B

2x

2x

2x

2x

DE Assembly

GB Assembly

FR Assembly

IT Assembly

NL Assembly

CZ Assembly

SK Assembly

HU Assembly

SI Assembly

HR Assembly

BG Assembly

RO Assembly

BA Assembly

2

A

2

B

2

C

2

D

DE Assembly

SI Assembly

GB Assembly

HR Assembly

FR Assembly

BG Assembly

IT Assembly

RO Assembly

NL Assembly

BA Assembly

CZ Assembly

SK Assembly

HU Assembly

EN Cleaning / Maintenance

FR Cleaning / Maintenance

[CTART]	DE	Betrieb	SL	Delovanje
	EN	Operation	HR	Rad
	FR	Fonctionnement	BG	Pabota
	IT	Esercizio	RO	Functionare
	NL	Gebruik
	CZ	Provoz
	SK	Prevádzka
	HU	Üzemeltetés

Introduction

To enjoy your new electric garden shredder as long as possible, please read carefully the Operating Instructions and the attached safety instructions before using it. Further, we recommend keeping the Operating Instructions to recall the product features in the future.

Within the continuous product development, we reserve the right to make technical changes to improve it.

This document represents translation of the original Operating Instructions.

Supply includes

Take the machine out of the transport package and check whether there are the following parts:

• GH 2802 SILENT Garden Shredder - 2 pcs of transport wheels with wheel covers - Axis - Feeding help - Collection box • 4 screws with washers - Allen key - Spanner • Original Operating Instructions

Please contact your dealer if any parts are missing or are damaged. When assembled, the machine weighs 14 kg. Take the machine out of the transport package in two people if necessary.

Machine specification

Robust garden shredder with a knife cutting mechanism. Ideal for trees and bushes. Shredded material is effortlessly ground by the steel rotary knife, accelerating the composting process. Automatic pulling-in of shredded material within Ø 40 mm.

Pic. A

1. Feeding help
2. Garden shredder
3. Transport wheel
4. Feet
5. Collection box
6. Overload protection-RESET
7. ON/OFF switch
8. Entry and exit of the shredded material

Technical specifications

GH 2802 SILENT #94376 ELECTRIC GARDEN SHREDDER

Voltage/frequency: 230V~50Hz

Engine output: 2,800W (P1;S6 40%)**

Max. engine speed: 60 per min

Protection type/class: II

Max. branch diameter: max. 45mm

Collection box capacity: 60l

Noise: L WA 106 dB*

Weight: 19.4 kg

Noise information

Measured values according to 2000/14/EG

General safety instructions

Read these operating instructions carefully. Familiarize yourself with the controls and proper use of

the machine. Keep the operating instructions for future reference.

• The machine meets the requirements of EN 61000-3-11 and is subject to special connection conditions. This means that using the machine at any connection point is not allowed.
• The machine may cause temporary voltage spikes under inappropriate system conditions.
• The machine has been designed exclusively for use at connection points that do not exceed the maximum allowable system impedance Z = 0.233 Ω .
• As the user, you must ensure, after consulting your energy supplier if necessary, that the connection point where you intend to operate the machine meets the above requirement.

Safe work

Keep your work area clean!

Any mess in your work area may result in injuries.

Consider environmental influences

Do not expose the machine to rain.

Do not use the machine in a moist or wet environment.

Provide adequate lighting.

Do not use the machine near flammable liquids or gases.

Keep other persons at a safe distance!

Do not let other persons, especially children, touch the machine and the cable. Keep them at a sufficient distance from your work area.

Store the machine properly!

A machine that is not being used must be kept in a dry and locked place, inaccessible to children.

Do not overload the machine!

Work within the specified power range.

Use the right machine!

Do not use the machine for purposes for which it has not been designed.

Take care of your machine!

Comply with the servicing regulations and instructions.

At regular intervals, check the machine cable and have it replaced by an authorized professional if damaged.

At regular intervals, check the extension cable and replace it if damaged. Keep the handles dry, free of oil and grease.

Be careful!

Pay attention to what you are doing. Work sensibly. Do not use the machine when you are tired.

WARNING!

Using any other accessory equipment may represent a risk of injury for you.

Have your machine repaired by an electrician only!

This machine meets the applicable safety provisions. Any repairs may only be executed by an electrician, using original spare parts, otherwise, the user could face a risk of injury.

Machine-specific safety instructions

Switch the machine off and unplug it before any work on the cutting mechanism.

If the feeder cable gets cut off or damaged when in operation, do not touch it in any case but deactivate the fuse of the respective electrical circuit.

Never use the machine with a damaged e.

Wear protective gloves, protective earphones, solid shoes and long

Any longer shredded material protruding from the machine may get thrown off by impact when being pulled in so keep a safety distance and work carefully.

Watch the rotating cutting knife. Never put hands and feet to the opening.

Make sure bystanders are not hit or ed by thrown-off items.

Keep bystanders in safe distance from the machine.

Wait until all parts of the machine stop before touching them.

Never use the machine when raining.

Never stand on the collection box.

Never touch the feeding hopper when the machine is being operated. After switching the machine off, it keeps running for some seconds.

Children and persons not familiar with the machine, and persons with limited physical, sensory, or mental capabilities, must not operate the machine.

Before starting the machine, it must be assembled according to the instructions provided.

Use the FI switch and check it whenever you are about to use it.

Only use extension cables that are protected against spraying water and recommended for outdoor use.

Never touch the plug and outlet with damp hands.

Never run over, jam, jerk, or pull the feeder and extension cable. Protect the cable against excessive temperatures, oil, and sharp edges.

No persons or animals may be within 3 meters when the machine is being operated. The operator is responsible for other persons in the working area.

Only use original accessory equipment.

Do not wear loose clothing, long laces, or ties.

Use the machine in a free space with a level and solid surface.

Never use the machine on a paved or uneven surface. Any thrown-off material may cause injuries.

Before putting the machine into operation, check all screws, nuts, and other fixing parts to ensure they are tightened, and check all protective equipment to ensure it is fitted properly. Replace any damaged or illegible warning and information plates.

Before starting the machine, make sure the feeding hopper is empty.

Keep your face and body beyond the reach of the feeding hopper.

Prevent your hands, other body parts, and clothing from getting near the feeding hopper and ejection hole. To insert a branch into the opening, use the feeding help.

Switch the machine off before hanging or unhanging the collection box.

Maintain balance and a safe posture at all times. Do not lean too far forward and never stand higher than the machine's foot when filling.

Keep distance from the ejection zone at all times.

Make sure, with maximum care, that the processed material does not contain any metal parts, stones, bottles, tins, or other undesirable items.

Switch the machine immediately off if any undesirable item gets into the cutting mechanism, if the machine makes a strange noise, or starts vibrating. Unplug the machine and proceed as follows:

• Review the damage.
• Replace any damaged part or have it repaired.
• Check if the parts are not loosened and tighten them if necessary.

Never try to repair the machine, even if you are properly trained in it.

Make sure the processed material does not accumulate in the ejection shaft, as this would prevent transport and could cause a backlash in the feeding hopper.

If the machine is blocked, switch it off and wait until the cutting mechanism stops. Unplug the machine before taking the shredded material out of the machine.

Make sure the covers and protective equipment are not damaged and check if they are fitted properly. Provide any necessary servicing or repair before using the machine.

Never try to change the engine speed settings. Contact a professional in case of any problem.

At all times, keep the ventilation slots free of debris and other deposits to prevent engine damage and possible fire.

Never lift or carry the machine when the engine is running.

Switch the machine off and wait until the cutting mechanism stops. Unplug the machine when leaving your place of work.

Never tilt the machine while it is being operated.

Never expose the machine to rain or moisture. Keep the machine in a dry place only.

Never attempt to put the emergency switch-off out of service.

Use as designated

The machine has been designed to shred fibrous and woody garden waste. The collection box has only been designed for collecting (not storing) the shredded material. Never stand on the collection box.

The machine cannot be used for works other than those for which it has been designed and that are specified in the Operating Instructions. Any other use is a use in conflict with the designation. The manufacturer will not be liable for any consequential damage and injuries. Please be sure to know that the machine has not been designed for industrial purposes.

Assembly

Caution! The machine must be switched off and unplugged before any servicing, cleaning, and assembly. The same must be done if the feeder cable has been damaged, cut, or entangled.

Respect the system voltage: The current source voltage must match the details on the type label of the machine.

An extension cable with a small conductor cross-section significantly reduces the machine performance. At least 3 x 1.5 mm² for cables with length up to 25 m and at least 2.5 mm² for cables longer than 25 m. Caution! Extension cables not specified must not be used. The extension cable, plug, and coupling must be watertight and approved for outdoor use.

Cable connections must be dry and must not lie on the ground.

If a cable reel is used, it must be fully unreeled.

Proceed as follows (pic. 1-2):

- Take the machine out of the package and install the axis, transport wheels and the collection box (pic. 1-2).

Operation

Put the machine on a solid and even surface at all times. Never tilt or move the machine when the engine is running.

Caution! The engine runs down after switching the machine off.

Remove earth from root balls and prevent undesirable items, e.g. stones, glass, metals, plastic or textile materials from entering the feeding hopper and subsequently to the machine and cutting cylinder as the machine could get damaged.

The feeding hopper must be empty.

Switching the machine on:

Press the ON/OFF switch (pic. 5).

Switching the machine off:

Press the ON/OFF switch (pic. 5).

Restart protection

The restart protection prevents accidental machine start after power failure.

Overload protection

If the machine is exposed to a high load (e.g. cutting cylinder is blocked), it stops after a couple of seconds.

Working instructions

• Insert only such amount of shredded material that the feeding hopper does not get blocked.
• Do not shred soft waste without any solid consistency but compost it straight away.
• Make sure the shredded material falls to the collection box or collection bag unobstructed – risk of getting blocked!
• Optimum results are achieved when shredding fresh branches shortly after they have been cut.

Never touch in the opening, not even when the engine is off. Knives are sharp! To insert shredded material in the opening, use the feeding help.

Marking

Product safety:

CE
Product corresponds to applicable EU standards

Prohibitions:

No pulling the plug!	Protect against rain and moisture!

Warning:

Warning/Caution	Warning against dangerous voltage

Warning against thrown-away items	Warning! Rotating machine represents a risk of injury!
Unsuitable for outdoor spaces	Keep bystanders in safe distance from the machine.

Commands:

General command sign			Please read the Operating Instructions before using the machine
Use protective glasses and headphones			Protective gloves to be used

Environment protection:

Dispose waste professionally so as not harm the environment.			Packing cardboard material may be delivered to collecting centres for recycling.
Any defective and/or disposed electric or electronic devices must be delivered to respective collection centres.

Package:

Protect against moistureCaution - FragileThis side up	Interseroh-Recycling

Technical specifications:

Voltage frequency Max. output
Revolutions per minute Branch diameter
		IPX4
Collection box capacity Protection type

Weight Noise
Switch the machine off and unplug it before any servicing and cleaning!		Do not touch in the pull-in opening! Risk of injury!

Warranty

A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences on the day of purchase of the device.

Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with indication of date of sale must be presented in case of claiming for the warranty rights.

Warranty does not cover unprofessional use such as device overload, violent use, damage caused by third party or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear.

Residual risks and protective measures

Electrical residual risks:

Risk	Description	Protective measure(s)
Direct electric contact	Electric shock	Safety switch against stray current FI
Indirect electric contact	Electric shock through medium	Safety switch against stray current FI

Other risks:

Risk	Description	Protective measure(s)
Thrown-off items	Shredded material, undesirable items and similar may get thrown off by the machine and cause injury	Gloves and protective glasses to be worn at all times.
		You and bystanders must keep sufficient safety distance
Slipping, tripping or falling of persons	The feeder cable and machine itself may be a reason of tripping.	Take appropriate measures, depending on the type of installation. (appropriate place, installation, installation place marking, etc.)

Emergency Action

Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from more accidents and calm him/her down.

For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

Disposal

Disposal instructions are illustrated in the form of pictograms on the device or packaging. Description of the pictograms is given in "Identification" chapter.

Disposal of transport packaging

Packaging protects the device against damage during transport. Packaging materials are usually selected according to their effect on the environment and disposal methods and can therefore be recycled.

Returning the packaging to circulation saves resources and costs for packaging disposal.

Parts of the packaging (e.g., foil, styrofoam) may be dangerous for children. Risk of suffocation!

Keep these parts of the packaging out of reach of children and dispose of them as soon as possible.

Operator requirements

The operator must carefully read the Operating Instructions before using the machine.

Qualification

No special qualification is necessary for using the machine apart from detailed instruction by an expert.

Minimum age

The machine can only be operated by persons over 16 years of age. An exception includes youngsters operating the machine within their professional education to achieve necessary skills under trainer's supervision.

Training

Using the machine only requires appropriate instructions by a professional or reading the Operating Instructions. No special training is necessary.

Servicing and keeping

Switch the machine off and unplug it before any servicing and cleaning.

Keep the ventilation slot and body without any dust and dirt.

To clean the machine, use a smooth and fine soap water solution. Prevent any direct contact of aggressive cleaning agents with the machine. No aggressive, volatile or caustic cleaning agents may be used.

Once a year, have the electric garden shredder checked by a qualified authorised professional.

The machine needs to be protected against moisture and dust.

If the machine is used for a longer time, keep it covered in a dry, safe place inaccessible to children.

Troubleshooting

The table shows possible failures, their causes and remedy options. If the problem still cannot be removed, contact a professional to help you.

Switch the machine off and unplug it before any cleaning or maintenance.

Symptom	Possible cause	Remedy
Machine not running	Collection box not fitted properly	Install the collection box properly
	Feeding hopper not fitted properly	Install the feeding hopper properly
	Defective outlet	Use another outlet
	Extension cable is damaged	Check or replace the cable
	Fuse has been activated	Change the fuse
	Overload protection has been activated	Press the overload protection button (pic. A/8) and remove the blocking as specified in “Operation”
Shredded material not pulled in	Shredded material is wet and soft	To insert the shredded material in the machine, use the sliding part
	Shredded material has got jammed in the machine	Remove the blocked shredded material (safety gloves to be worn at all times)

Service

Any technical questions? Complaint? Do you need spare parts or operation manual?

Go to our website www.guede.com and the section Service will help you quickly and without bureaucracy. Please, help us to help you. In order to identify your device in case of complaint, please indicate serial number, order number and year of manufacture. All information is available on the product label. To have all information always at hand, put them down.

Serial number:

Order number: Year of manufacture:

Phone: [phone] / 700-360

Fax: [phone]

E-Mail: [e-mail]

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Introduction

Translation of the EC-Declaration of Conformity

We hereby declare that the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to the appropriate basic safety and hygienic requirements of the EC Directives.

In case of any change to the appliance not discussed with us, the Declaration expires.

Notified Body Name: No: Address:

Type Ex. Cert.-No.:

97/68/EC & 2016/1628/EU

Emission No.:

2000/14/EC & 2005/88/EC