D-LINK DNH-100 - Controller

DNH-100 - Controller D-LINK - Free user manual and instructions

Find the device manual for free DNH-100 D-LINK in PDF.

📄 114 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice D-LINK DNH-100 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeNetwork Controller
BrandD-Link
ModelDNH-100
Dimensions (approx)200 x 150 x 30 mm
Weight (approx)500 g
Power SupplyPoE (Power over Ethernet) or DC adapter (12V)
Network Interface10/100/1000 Mbps Ethernet
ManagementWeb-based interface, SNMP, CLI
SecurityWPA2, 802.1X, ACL
MountingDesktop or rack-mountable (brackets included)
Operating Temperature0°C to 40°C
Storage Temperature-20°C to 70°C
Humidity10% to 90% non-condensing
CertificationsCE, FCC, RoHS
MaintenanceClean with soft dry cloth; avoid liquids
Spare PartsContact D-Link support or authorized dealers
RepairabilityDesigned for professional repair; user serviceable parts: none
Included AccessoriesPower adapter, mounting brackets, Ethernet cable, quick install guide

Frequently Asked Questions - DNH-100 D-LINK

How to reset DNH-100 to factory defaults?
Press and hold the reset button on the back for 10 seconds until the LED blinks.
How to access the web interface?
Connect to the same network, open browser, enter default IP 192.168.0.1 or find via D-Link utility.
What is the default username/password?
Default is admin/admin. Change immediately after first login.
Can I mount it on a wall?
Yes, mounting holes are provided; use appropriate screws.
Does it support PoE?
Yes, it supports PoE 802.3af/at for both power and data.
How many devices can it manage?
Up to 50 access points or clients depending on configuration.
What is the warranty period?
Typically 2 years, check local regulations.
Where to download the manual?
From D-Link support website or notice-facile.com.
How to update firmware?
Download from D-Link, upload via web interface under Management > Firmware.
What to do if LED is not on?
Check power connection, ensure PoE switch is working, or try DC adapter.

User questions about DNH-100 D-LINK

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Controller in PDF format for free! Find your manual DNH-100 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DNH-100 by D-LINK.

USER MANUAL DNH-100 D-LINK

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : D-LINK

Model : DNH-100

Category : Controller