ProSafe FS526T - Network switch NETGEAR - Free user manual and instructions
Find the device manual for free ProSafe FS526T NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | NETGEAR |
| Model | ProSafe FS526T |
| Ports | 24 x 10/100 Mbps RJ-45, 2 x 10/100/1000 Mbps Gigabit RJ-45 |
| Dimensions (W x D x H) | 440 x 205 x 43 mm (17.32 x 8.07 x 1.69 in) |
| Weight | 3.2 kg (7.05 lbs) |
| Power Supply | Internal, 100-240V AC, 50-60 Hz, 30W max |
| Mounting | Rackmountable (1U), Desktop |
| Switching Capacity | 8.8 Gbps |
| MAC Address Table Size | 8K entries |
| VLAN Support | IEEE 802.1Q Tagged VLANs (up to 64 groups) |
| Quality of Service (QoS) | 802.1p, DSCP based |
| Management | Web-based GUI, SNMP v1/v2c |
| LED Indicators | Power, Link/Act, Speed, FDX/Col |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 10% to 90% relative humidity (non-condensing) |
| Safety Certifications | CE, FCC, RoHS |
| Maintenance & Cleaning | Use a soft dry cloth. Do not use liquids or aerosols. Keep vents clean. |
| Safety Precautions | Place in well-ventilated area. Do not expose to water or excessive heat. Unplug before cleaning. |
| Spare Parts & Repairability | No user-serviceable parts. Contact NETGEAR support for service. Power supply is internal. |
| General Information | Managed smart switch for small to medium business networks. Supports trunking, port mirroring, and loop detection. |
Frequently Asked Questions - ProSafe FS526T NETGEAR
How do I set up the ProSafe FS526T for the first time?
Connect the switch to power and your network devices using Ethernet cables. By default, the switch operates as a plug-and-play device. For advanced configuration, use the web interface by entering the default IP address (192.168.0.239) in your browser.
What is the default IP address of the FS526T?
The default IP address is 192.168.0.239 with subnet mask 255.255.255.0. Ensure your computer is on the same subnet to access the web interface.
How can I reset the switch to factory defaults?
Use a paperclip to press and hold the 'Factory Defaults' button on the front panel for about 5 seconds until the LEDs blink. Alternatively, use the web interface under 'Maintenance > Reset'.
Can I use the FS526T with Gigabit devices?
Yes, the two Gigabit ports support 10/100/1000 Mbps speeds and can connect to Gigabit devices. The 24 Fast Ethernet ports support 10/100 Mbps.
Does the switch support VLANs?
Yes, the FS526T supports IEEE 802.1Q tagged VLANs with up to 64 VLAN groups. You can configure them via the web interface under 'Switching > VLAN'.
What should I do if the switch is not powering on?
Check the power cable connection and ensure the outlet is working. If the Power LED is off, try a different power cord. If still not on, contact NETGEAR support.
How do I update the firmware?
Download the latest firmware from NETGEAR's support site. Then log into the web interface, go to 'Maintenance > Firmware Upgrade', choose the file, and click 'Apply'.
Can I mount the FS526T in a rack?
Yes, the switch is 1U rack-mountable. Use the included rackmount brackets and screws. Ensure proper ventilation behind the rack.
What do the LED indicators mean?
Power: solid green when on. Link/Act: solid green for link, blinking for activity. Speed: green for 100 Mbps, off for 10 Mbps. FDX/Col: solid for full duplex, blinking for collisions.
Is the switch compatible with all Ethernet cables?
Use Category 5 (Cat5) or higher cables for 10/100 ports, and Cat5e or Cat6 for Gigabit ports to ensure proper performance. Shielded cables are not required unless in high-interference environments.
User questions about ProSafe FS526T NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual ProSafe FS526T - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProSafe FS526T by NETGEAR.