AirInstinct 200 AIR108 - Air purifier Oreck - Free user manual and instructions
Find the device manual for free AirInstinct 200 AIR108 Oreck in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Air purifier |
| Brand | Oreck |
| Model | AirInstinct 200 AIR108 |
| Dimensions (W x D x H) | 28 x 28 x 45 cm |
| Weight | 4.5 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Power consumption | 55 W max |
| Coverage area | Up to 40 m² |
| Airflow (CADR) | 180 m³/h (dust), 170 m³/h (pollen), 150 m³/h (smoke) |
| Filtration technology | Pre-filter, HEPA H13 filter, activated carbon filter |
| Main functions | Air purification, removal of allergens, odors, dust, smoke, pollen, pet dander |
| Fan speeds | 3 speeds + sleep mode |
| Noise level | 25-55 dB depending on speed |
| Air quality indicator | Color LED (blue, green, orange, red) |
| Automatic mode | Yes, adjusts speed according to air quality |
| Timer | Programmable (1-8 hours) |
| Maintenance and cleaning | Water-washable pre-filter, HEPA/carbon filter to be replaced approximately every 6-12 months |
| Spare parts | HEPA and activated carbon filters available for purchase |
| Safety | Automatic shut-off in case of tipping, overheat protection |
| General information | 2-year warranty, manufactured under license from Oreck |
Frequently Asked Questions - AirInstinct 200 AIR108 Oreck
What filters are used in the Oreck AirInstinct 200 AIR108 purifier?
It uses a washable pre-filter, a HEPA H13 filter and an activated carbon filter. The pre-filter can be cleaned with water; the HEPA and carbon filters should be replaced every 6 to 12 months depending on usage.
How to clean the pre-filter of the AirInstinct 200?
Turn off the device and unplug it. Remove the pre-filter by gently pulling it. Wash it with warm water and mild detergent, rinse it, and dry it completely before reinstalling. Do not use abrasive products.
How to replace the HEPA and carbon filters?
Open the back cover, remove the old combined filter, insert the new filter (compatible Oreck AIR108 model). Close the cover. Reset the replacement indicator by pressing the 'Reset' button for 3 seconds.
What do the colors of the air quality LED mean?
Blue: pure air, Green: good quality, Orange: average quality, Red: poor quality. The purifier automatically adjusts the speed in auto mode.
Can the purifier operate continuously all night?
Yes, you can use sleep mode for quiet operation (about 25 dB). Auto mode adjusts the speed at night according to air quality.
What is the recommended coverage area?
The AirInstinct 200 AIR108 is suitable for rooms up to 40 m² for effective purification. For best results, place it in the center of the room.
How to set the timer?
Press the Timer button to cycle through options from 1 to 8 hours. The device will automatically turn off after the selected time.
Does the purifier emit unusual odors or noises?
Under normal operation, it is quiet. If you hear a clicking noise or smell a burning odor, check that the filter is properly seated and clean. If the problem persists, contact customer service.
Can I use the purifier in a kitchen to eliminate cooking odors?
Yes, the activated carbon filter is designed to reduce cooking odors, tobacco smoke, and VOCs. Place the device near the source for better efficiency.
How to reset the filter replacement indicator?
After changing the filter, plug in the device and press the Reset button (located on the back or control panel) for 3 seconds until the indicator flashes then turns off.
User questions about AirInstinct 200 AIR108 Oreck
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual AirInstinct 200 AIR108 - Oreck and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AirInstinct 200 AIR108 by Oreck.